Double Trouble – Rebel RC

Carisma’s GT24T & GT24TR 1/24th Brushless 4WD RTR Vehicles Tested

Words & Images: Phil MakeItBuildIt Lawrence

Spec

  • 8000kV Brushless Motor
  • Friction Dampers
  • Detailed Rubber Tyres
  • New Full Sized CTX8000 Tx
  • Responsive Steering Servo
  • 1S 3.7V (stock) or 2S 7.2v (Upgraded) LiPo Powered
  • Length 185mm
  • Wheelbase 121mm

UK RRP: £79.99  Global RRP: $109.99

Available in the UK Here   Available Globally Here

Need Another GT Hit

After reviewing the Carisma GT24R, a miniature Pikes Peak replica and thoroughly enjoying racing it around the House, Garden, outside on Tarmac (hell, anywhere I could find an imaginary Rally Course to test it on!). I next wanted to stay with small form factor RC, but with a vehicle that had more Off Road capabilities (Putting it bluntly: I wanted to get some jumps in!). A few phone calls later and along came a small box, it contained both of the GT24R’s freshly born siblings …

The GT24T (Monster Truck) and the GT24TR (Truggy)

Big Similarities – Subtle Differences

Who doesn’t love a cool Monster Truck or Truggy?

Both of these share the same chassis as the GT24R with its fantastic micro brushless power system and well designed and manufactured suspension and steering, however there are a few differences.Apart from the obvious body shell change, the wheels are different too. Larger wheels with deeper and wider tyres, allowing for more grip on the loose stuff, body posts are present but not used and the rear bumper from the GT24R is not installed or needed

Chassis Rear
Underneath the bodyshells the Monocoque Chassis and running gear is the same
Chassis top
The hologram sticker ensures the authenticity of this Cariama product

Unlike many other small scale RC manufacturers who like to offer smaller form factor Transmitters with their products, Carisma have coupled the GT24 series of cars with the very much full sixed CTX8000 transmitter.

Controller
The cars may be small, but the Tx is full sized (and featured!)

It’s both ergonomic (fits the hand nicely), and full featured. It also offers trims for steering and throttle, servo reversing along with an adjustable steering rate thumb wheel conveniently placed on the handle by your thumb (you will see later why this is a good idea).

Good for Kids N Newbies Too

The CTX98000 also comes with a rubber throttle limiter that you can slide over the trigger, so it stops the driver using full throttle. Something that would be useful when you hand the remote to a new to RC driver or young child for example.

Chassis top close
Note the Velcro on the side…no body posts required!

Chassis under close

The chassis is a vented enclosed monocoque design and is super sleek, hiding inside under more than adequate protection all of the electrics  like the fast steering servo, and the 8000kv brushless motor. Keeping little fingers (or big ones) away from any hot or moving parts. (no scorching fingers on hot motors here) alongside keeping all the muck outside where it belongs.

Chassis battery empty
The space under the chassis offers space for either a 1 or 2S LiPo

Sliding open a small hatch on the bottom reveals a very neat battery compartment, which the 1s brushless battery fits in with ease. This is where I made my first upgrade, as I had already tried the GT24R (insert link) on a 1s battery and loved it, but the animal in me wanted more. I thought why not give in and go with a 2s I had ready to slot in, cue big demonic grin!

Chassis Battery Full
Tetris skills required…its tight but possible!

The official Carisma upgrade 2s battery is a tighter fit than the stock 1S offering, but once I engaged my Tetris brain, I found an easy way to fit it. keep the red JST connector against the inside of the chassis, then feed the battery in, the balance lead will fit perfectly at the end of the battery…someone designed this to fit well.

No Slop & Well Designed

Suspension again is remarkably sturdy for its size and I’m still shocked at how little play there is in the joints, especially when you consider how much slop is in some 1:10 scale or larger cars. The advantage to this is that the handling won’t be compromised by lots of play, as even a small movement in this scale could change camber/caster or toe by a large percentage. In short:-

No Slack = Predictable Driving = More Fun

The wheels are kept on the ground with twin wishbone suspension , which does not have adjustable geometry, but does allow 2 different shock mount points both top and bottom, alongside 2 steering arm positions on the hub, neither of which have any bump steer when I tested them.

Chassis under
This could be a 1/10th or even a 1/8th…but its way smaller than that!

For those that don’t know, bump steer is when the steering arms are not designed with the same pivot point geometry as the suspension, so as the wheel is moved up and down it causes the wheel to turn in or out. this makes the handling not so good and is best avoided. Thankfully Carisma have got this right and you don’t need to worry…

DSC05842 copy
The design is tough and robust…designed to be run not looked at!

Shocks are friction shocks with fixes spring rates, although I believe that oil filled dampers are available as an upgrade if its something you wanted to do, along with carbon shock towers and all other manner of goodies.

DSC05841
The stickers on each wheel add additional detail…while mainitaining the strength of a dish

I did my old skool drop / bounce test and if you are racing this competitively, then I would look at the shock upgrade, if you are having fun with it, ragging it about with friends, I would not worry the stock shocks work well.

All of the models are 4WD and pack a differential front and rear, meaning no scrubbing when turning and more grip. There is a built in slipper clutch too, there is a chance I might need it with 2s power!

2s battery
1S is fast, but 2S is ballistic!
charger
USB LiPo charging offers safety for younger users, but remember in some terratories the vehicles dont ship with LiPo or Chargers

Body wise unlike the GT24R, no body mount or pins are needed, instead you have a foam extension on the side of the chassis and Velcro to mount the body. You don’t need to remove the body to change the battery, or to turn the car on and off, all of that is done on the bottom of that lovely enclosed chassis.

As mentioned earlier, there are two body styles, the Truck (GT24T) and the Truggy (GT24TR), it comes to personal choice which you prefer, both offer great visibility and do not affect the handling, means when racing your mates its easier to see which is yours

Ensure Body Sits Correctly

On the GT24T, the first time I drove it I had to move the body slightly backwards to stop the front wheels catching the body on full lock, but that took me a few seconds and was zero hassle to do, this was probably my fault from when I took the shell off for the photographs. It’s likely i did not put it back in the correct location based on the wheel wells, and I had just lined the Velcro up.

DSC05780
Probably the cutest Monster truck in the history of RC

Performance on 2s is blistering and you would have to be a driving god (well better than me) to drive in a standard house sized room at full throttle, I recon it could do a 24th wall of death quite easily !

DSC05847
I wonder how many back flips I can do with it? Only one way to find out!

Outside or in a larger space where you can give the Carisma GT24 its legs, OMG how can something that small manage such acceleration, the top speed is impressive and I would love to know what it works out on scale speed, I’ve now nicknamed the GT24TR “Bluebird”!

Watch Out For Grip Roll

Thankfully the CTX8000 controller comes with a handy steering travel/rate adjust so when you are bombing along at warp factor 5, you can dial down the steering so it’s not too aggressive and induces a high speed roll…. ok, I admit, I found this out the hard way. After belting along at full speed with a massive grin on my face, I turning sharply and let’s just say I stopped counting at 8 flips and started the walk of shame while it was still going.

DSC05766
Much more of a serious Race Stance…The Truggy looks epic!

Testament to Carisma, no damage, apart from a few scratches to the shell, which has to be expected when playing on concrete.

DSC05855
Note how much difference the wheels make to the overall look…

The suspension does a good job of soaking up the terrain, I did find the odd bounce now and again when going over some rougher parts at high speed, but that added to the fun.

We gave it a whole 1 minute before starting doing jumps, yes our resolve was that strong! (now you understand why we take the pictures before driving). These two are a hoot, and the more you have, the better it gets, having 2 or 3 racing round is fantastic fun for not a big outlay.

Verdict: Highly Recommended…can’t wait to see what they do next, a baby Short Course or Rock Racer would be cool. Or even a baby Crawler/Scaler…watch this space!

Available in the UK Here   Available Globally Here

Really Tiny Trucks…Simply Rock!

Pro-Line Ambush 1/25th 4WD RTR Electric Mini Scale/Trail/Crawler

Words & Images Daniel Siegl & ProLine

Available Globally: HERE  Available in the UK: HERE

Length: 198mm

Width: 95mm

Wheelbase: 115mm

Weight: 308g

I always fancied a smaller true Scale/Trail/Crawler rig. But until very recently there was only really one option; the Losi Trekker. Trouble is, that rig was never quite my thing, and it was very much a case of form over function. It looked great but out where it mattered it just didn’t cut the mustard. Also, its basic spec left a little to be desired. The NIMH batteries for example, the weak steering servo and relatively high C of G all combined to make the actual driving experience itself a little unimpressive.

pro-line-ambush-13
About the same size as a Losi…but that’s where the similarity ends!

This aside, more recently ProLine hit the RC scene with its Ambush and RC4WD its 1/18th D90…The latter will be covered in a future article from Peter Gray, the former, I just had to get my hands on and review.

Just Wow…

g2
Leaf Springs For The Win…Literally!

Was my first reaction, finally someone had thought a rig of this small scale through properly. But are they the same axles as the Losi or different? Giving it a closer inspection I can confirm, it is a completely different car – the similarities really only relate only to the size and the fact that they both have an integrated Speed Controller and 2.4GHz Receiver unit – that’s it.

g3
Compact and well thought out electrics placement and weight bias

You’ve probably already read all about the technical details of the rig – So, I won’t bore you with too much of that. This review will be a charge it and run it, hands on affair. After all isn’t that what’s important with a RTR product? Yes many of us eventually modify a RTR vehicle in some way to improve its performance, and also aesthetically to personalize it’s look.

g13
The tiny motor had lots of well needed Torque!

Actually, I will be totally honest here, we had our review sample car back in November, but our friend Brian Parker found so very entertaining and decided to give it a shakedown of his own! That’s why we ended up getting it just after Christmas, used and without any packaging!

2 Hardcore (But Tiny) Testers…

pro-line-ambush-18
Perfect for little (and big) kids anywhere in the World!

I wanted to just look at the rig for a while, its that cute, then go run it myself. But, my 2 girls, one 3.5 and the other 5.5 discovered it for themselves and started the hands on testing for me. The Ambush actually did a great job in this very tough role. After a full pack of running there was nothing broken. I was amazed, as its is finally an RC vehicle that my 2 were self-motivated to play with without prompting. And they keep asking to have more time with it!

pro-line-ambush-19
The rig really does perform well above its obvious size limitations

We tested the car in the last 2 months extensively at a variety of locations:

  • Indoor at Lego Course

pro-line-ambush-25
Forget Ed Shearan’s Lego House…we built a Lego Test Trail
  • On ice on the pond in front of the house

pro-line-ambush-22
Slippy meets Grippy…all together now:- “Ice, Ice Baby!”
  • And finally when the weather allowed, to drive it in Spillern

pro-line-ambush-16
Anything a 1/10th can do…you can attempt with the Ambush!

I have to say, of all the rigs that are in this size, so far the Ambush is clearly the most fun! So much fun in fact that that I tended to push it very hard and attempt things I probably shouldn’t with such a tiny rig, and yes as a consequence a lot of the time it ended up falling over. But when it made almost impossible looking lines it gave you such a feeling of achievement.

pro-line-ambush-5
The added RECON G6 decals help explain whos had our sample and what its been up to!

The leaf springs suspension work very neat, and like all the other Micro rigs out there, the tiny motors performance of course is rather limited. But that has a huge advantage when a child or newbie is driving it, since it is less can be broken!

g7
Considering its size the attention to detail is stunning…

At first glance the electrics seem very unexciting. But having run the rig lots now, my opinion is very positive. I think that even my 3.5 year old could handle the modern and simple USB charger. But fast its not…You need some patience when re-peaking the pack.

g15
Not fast, but safe…USB charging!

Verdict:

The first true small “Scaler” offering the ability to be able to drive it like its a much bigger rig.

g6
Against the included standard sized Tx it looks tiny…because it is!

It’s suitable for both children as well as experienced RC drivers. The included driver model looks right just needs a bit more paint and detail adding to give it more depth.

pro-line-ambush-17
1/10th next to 1/24th….Little n Large

It punches well above its weight and size and offers hope that this size of vehicle, packing much of the performance of its 1/10th counterparts could grow and grow.

g1
So much scope and so well made…huge thumbs up from me and RCCZ for the ProLine Ambush

With RC4WD and ProLine leading the way, lets hope more manufacturers follow suit., and a dedicated Micro class grows from it…check out our running video below!

Huge shout out to ProLine and the global RECON G6 family

See you out on the trails, or at a G6

Daniel

Create…Don’t Imitate

Words: Peter Gray & Dphotographer Danny Huynh

Images: Dphotographer Danny Huynh Archive

Huge shout out to www.RC4WD.com For helping facilitate this article.

Prologue

A few years back I started seeing images and posts online of some of Antipodean RC builder Dphotographer Danny Huynh amazing body shell art and full on build projects. I was simply gob smacked at the intricate detail, the unique approach he put to every aspect, and both the visual as well as mechanical story each one told.

Trying to explain what they convey without actually seeing them is difficult. They have a rare quality in that they are not only visually stunning, meaning you end up scrutinizing each image much longer than most RC posted online, but they are also truly innovate.

IMG_5726 2
I love this image on three levels…Terminator meets Lowrider meets Supercharger

Danny utilizes many stock components in very unique ways. he also adds detail features not usually associated with the original vehicles, like faux Rotary Engines more akin to use in a flight scenario, Machine Guns, Revolving cab sections and much more. Each build usually has a driver figure and or gunner/co-pilot/sidekick present, and these are often animated via linkages and servos to make then not only come to life, they actually look like they are steering/firing/riding. The figures often have a slightly dark Sci-Fi twist.

20161008_154220
I think Logan may have a slightly heavy right foot…But at least he can drive a manual!

From Terminator androids and Wolverine, to what can only be described as undead Sci-Fi Storm Troopers…(and not the Star Wars kind!), they have a look and presence that seem to elevate each build to an even higher level of cool.

No Two Are The Same…

He’s build 3WD chopper-esc Drift Trikes (yes you read that correctly…3WD, Drift Trike) based on 1/5th Thunder Tiger race bike, rigs based on Axial donors, painted some of the sickest drift car bodyshells I’ve ever seen, and more recently done a series of builds based on RC4WD kits, donor vehicles and parts. And these are something else!

20170109_153840
Near the start of a very cool revolving cab/gun rear engine rig…check out Danny’s FB for the finished thing!

I recently got a chance to interview the man himself. We are friends on Facebook, and comment on each others photographs and projects all the time, but I wanted to know more about him as a person. What inspires the man that himself inspires so many to re-visit the art of truly building. An art that for many has been lost, and to a whole new generation of RC fans, who have grown into the hobby with RTR vehicles, run mostly stock.

I do hope this will be in some way a wake up call and an inspiration to you to go and get yourself a kit, and put some of yourself into its build process. But enough of that, onto the interview…

20161222_144628
Note the suspension…Danny uses every part in new and interesting ways

RCCZ: What led you to this point in your RC builds? We want the Dphotographer Danny Huynh Origin Story…when did they go from Cool to Epic?

DPDH: “I’m a documentary photographer by trade and have always had a passion for cars. Not so much the mechanical side of them, but more passionate about the design aspects of cars. So about 5 years ago, I’ve decided to buy my first RC car!

I always wanted to win one while growing up in the 80’s since my parents couldn’t afford one, but hey… Better late than never!

I’ve never really considered my works as being cool or epic. I just do what I enjoy and am thrilled to see other people appreciate it…”

IMG_5589
Gotta love a blower on a big block engine & the RC4WD units simply deliver!

RCCZ: How would you describe your creations? To me they are functioning works of RC Art…They blow my mind and inspire me in equal measure.

DPDH:“I like to describe them as a form of creative thinking, I like to keep them very similar in style, but also different from each build to set them apart. I’ve never called myself an artist. I just stumbled into the title through the use of Facebook.

I suppose it is a form of art to a certain extent, specifically the painting and photography side of it…”

IMG_5066
Yes, that’s airbrushed/painted onto the side panels…amazing!

RCCZ: You seem to see the World in a very different way to most. What’s your favorite film/book? In my head I can see a whole Graphic Novel littered with your builds…what’s inside your head?

DPDH: “Not much goes inside my head to tell you the truth. I don’t read books or graphic novels, I’m more of a music person and must have something on all day, every day while I tinker.

Some of my favorite movies Kill Bill, Blade Runner, movies with alien/s etc., but I don’t see any of those being an influence in my work.

I feel that my biggest inspiration comes from WW2 vehicles. Particularly, the aircrafts during that period which I believe to be the best design in aviation history! “

IMG_5533
This tracked Beast II build wouldn’t look out of place in a Ridley Scott film on a distant planet…full of Aliens!

RCCZ: What was your first ever true RC vehicle? (and did you modify the hell outta it?)

DPDH: “As I mentioned previously, I bought my first RC car about 5 years ago. It was the re-release of the Tamiya Avante and brought back my childhood memories from the 80’s. Back then, it was Tamiya’s design with their Avante and Egress that really got my attention. Even the box art itself was truly a work of art.

Shortly after, I discovered RC drifting and bought a Tamiya VDS drift chassis. That allowed me to be really creative and paint the drift shells in different ways. I think this is where it all really started with teaching myself how to paint drift shells and eventually lead to modifications on the VDS. It was the first of my animated drivers, the Kick Ass action figure!

IMG_5627
Whatever that ‘Bomb’ is on the back (Hydrogen, Confetti, N0z?) it adds a twist to this build that’s simply epic!

RCCZ: If you could build anything, based on any kit, from any manufacturer ever made, no budget restrictions…no scale concerns, what would it be?

DPDH: “I’ll have to go with what I’m building with right now. I have built quite a few different RCs, but nothing compares to RC4WD’s products. Not only do their scale trucks really suit my style of building, but RC4WD provides a great deal of details in all their products. Mainly, their scale chassis’ really brings my designs to life…”

IMG_5666
Ready to take on almost anything…the tail gunner and detail is on another level…Another stunning build

RCCZ: What are the top 3 things you can offer as advice for people inspired to get their own build projects started?

1. Create and don’t imitate

2. It doesn’t have to be realistic, just as long as it works and looks “unreal”.

3. Have fun!

IMG_5732
The skull on thee front grille just adds that finishing touch…

RCCZ: Any insights into your latest projects? Anything we really need to know about you, and the future of PDH?

DPDH: “I try to build a new project every month. it usually takes a month or two for all the detailing and creation to work as one. Currently, I’m working on a RC4WD Gelande 2 with their classic Toyota Land Cruiser Body. It’s a tow truck based on the Zero Warbird with a radial engine. hehe…”

PS: “You might also be seeing another Trike soon, since I’ve been wanting to challenge myself with another 3 wheeler…”

IMG_5538
Nothing would stand in this rigs way…and if it did it would be crushed (mentally & physically!)

RCCZ: Have you ever thought of producing a book about the entire body of your work? I could see it sitting on coffee tables all over the World…especially mine!

DPDH:“I never considered producing a book, but yes, that would be cool. I pride myself as a photographer as that is after all how this all started… you know, painting drift shells and photographing them. I have to snap a photo everyday otherwise I go mad…hehe!”

IMG_5551
Undead Storm Trooper anyone? Pretty isn’t he! and on a very minimal ride…

RCCZ: Last question…Where do you want to see the RC Industry and this vibrant Scale Scene go in the future? Is it still as exciting and diverse as when you first got hooked? Or do you think it needs more people with your drive and vision to push the boundaries a little, and inspire a new generation into getting involved and building using traditional model making techniques?

DPDH: “That all depends on what one loves about this hobby. I know that this industry is constantly growing and has been awesome with releasing new kits and creations quite regular to keep us happy.

The great thing about this hobby is that there are various aspects as to what we each love about it. For me, it’s creating, painting and photographing it. And yes, it “IS” as exciting as the day I discovered it! For others, it can be the racing side or competitive side to it, or both. Whichever it is, we need to keep practicing what we love about this hobby. Practice makes perfect, or at least pretty darn close!”

IMG_5306
One for the VW fans…now this would be one Camper Van I would love to take to Dubfest!

Epilogue

A huge shout out to Danny for taking the time to answer my questions. We look forward to seeing more of his builds in the future. Huge thanks’ also to RC4WD for helping facilitate this, and for more on Danny and his builds check out his Facebook page HERE 

I do hope that for those not familiar with his work it will inspire you to. Its set a benchmark in terms of being so different and taking us away from always striving to create photorealistic builds. Adding in a little weird and using a little leftfield thinking creates something fresh and exciting, and long may that be so!

Untitled-1