Traxxas Finally Gets It’s Scale On…

Traxxas TRX-4 D110 1/10th 4WD Electric Scale & Trail Crawler

Words & Images: Peter Gray, Mike Worthington & Traxxas Archive

Manufacturer: Traxxas USA

UK Distributor: Logic RC UK RRP: £499.99

Specs

Ground Clearance: 80mm

Track Width: 249mm

Wheelbase: 324mm

Length: 586mm

Height: 291mm

Traxxas gave the RC car industry many firsts. The first true Ready to Run Hobby Grade RC vehicles. No building, no fuss, just add a charged battery and go run them. Then there’s the sponsorship and links for many years with Monster Jam, (I even worked at a couple of events doing the warm up with E-Revo’s and E-Maxx Monster trucks!). The iconic Grave Digger, Monster Mutt to name but two of the many licenced MJ models they released over the years.

TRAXXAS-Ken-Block-Gymkhana-Fiesta-Brushless
THe original Ken Block Replica…a Traxxas first

Then there was the original, (pre HPI) Ken Block Limited Edition Gymkhana Rally car. We all wanted one. We all bought one. Hell, I even interviewed him and shot him for a cover of RRCi back in the day. Sometimes we forget just how influential and innovative Traxxas products are. But that’s not all. They also gave us the ultimate in bashing vehicle, that was the catalyst for the global Short Course revolution, the Slash. Based on the 2 and 4WD vehicles driven by brothers Mike and Mark Jenkins in the real race series across the US, the Slash quickly became the must have bashing tool for any self-respecting RC fan.

I could go on and mention the very innovative Summit, the 103 mph X-01, the HUUUGE X-Maxx, the amazing Spartan Speedboat and many other products that have defined the company, but I don’t need to. You get my gist. The real point of this is to say that, for once, Traxxas were well behind the curve on a certain trend in RC, namely Scale and Trail Crawling.

They sat back, watched the industry, and waiting until the time was right and then “BOOM” the internet was suddenly full of images of the TRX-4, pictures leaked and speculation rife. Many of the claims were inaccurate. “It’s a 1/8th, it looks huge”, “It’s a Summit with shorter arms and a Land Rover body”, “Traxxas are too late onto the market…” yada, yada, yada.

TRX-4-3qtr-Rear-Rocks-Red
You have to admit, they got the look and ‘stance’ of the D110 just right…

But they had my interest straight away. Traxxas are one of those brands that hold a special place in my heart. I loved running my 2WD and 4WD Slashes, and have owned many, many Traxxas vehicles over the years. In fact I’m hard pressed to think of one that I’ve not had! The rest of the spec was finally leaked and then there was an official launch, with slick videos, a new section on their website, and an impressive list of features did it boast: –

Deep Breath…

Portal, T lock equipped axles, offering much better clearance under the axles for the diffs pumpkins. Remote locking and unlocking diffs, that could be run as both open, both locked or just front locked only.

TRX-4-t-lock-differentials
Remote Locking or Unlocking front and rear diffs…The Traxxas T-Lock system worked flawlessly in testing
TRX-4-Axle-assembly-front
By far my favourite feature of the whole design. Portal Axles that again just work. They offer unparalleled under axle clearance.

A two-speed transmission, with a 21T reverse rotation motor, meaning the brushes won’t destroy themselves as the motor itself is facing forwards, not backwards as with most other scale rigs on the market.

TRX-4-Transmission-Assembly
The two speed offers additional wheel speed when required. on 3S that can mean wheelies…NOTE: reverse direction motor alleviated the issue of damaged brushes with the forward motor position.
TRX-4-top-chassis
The layout and natural Weight Bias is logical and well thought out. A forward mounted battery option, or weighted front wheels would just take it from a 8.5/9 to a 10 instantly.

All the electrics are also 3S compatible as standard, so wheel speed isn’t going to be an issue. Cruise control allowing you to set a speed for long sections of trail running. Shocks are 90mm and designed to be smooth and leak free in use.

TRX-4-shock-cutaway
The shocks are smooth and well sealed, Just look at the depth of those seals and piston.

The whole rig was waterproof allowing you to cross streams and run in mud and wet conditions. Under arches for the Lexan (yes Lexan) “Fully Licenced” Land Rover Defender D110 bodyshell. A protective Exo-cage and roof rack.

TRX-4-Defender-Red-sideview
Proportionally its near perfect…Just those tinted windows niggle us. We want an interior.

Sticky deep treaded S1 soft compound tyres, with proper tuned inserts. Steel Hexes. 45 degrees of steering deflection and CVD’s as standard, a high torque, metal geared chassis mounted steering servo. A front weight bias and front mounted, motor position. Optimised main pack location and an easy to use reversible battery strap allowing 2 or 3S pack swaps without any hassle at all.

TRX-4-45-degree-steering-angle
The now industry benchmark 45 degree steering deflection is included as standard

Rock sliders, solid bumpers with the ability to add a real winch in place of the faux one supplied with the RTR. A very solid C-Section Steel ladder chassis and well-designed cross braces. The ESC is also programmable for Trail or Crawling modes with a “mild” or “always on full” drag brake setting an option. Lastly there’s the ability to fit LED lights and a light bar in the future. Holes are already there for this and mounting points for the LED’s.

TRX-4-side-chassis
So far weve only run it with the Traxxas D110 shell on. but other body post options are in the box so you could in theory put any LWB shell straight on.

What It Didn’t Have Are 2 things

Windows (well it did but they were tinted), so no interior or the ability for the end user to fit one. That’s a big thing to the established scale community, but will not deter the “yet to get the bug” crowd out there. It’s an odd thing to omit, so much has gone into getting a Licenced D110, why not offer tinted window stickers that could be removed to reveal clear underneath, and the ability to retro-fit an interior (Dear Traxxas, if you read this, please amend!)

TRX-4-Defender-Red-3qtr-rear
Rear of the Year? Judging by reports of the first two production runs almost selling out on pre-order already…we think so!

True beadlocks wheels were absent too. The stock wheels and tyres are glued. I really don’t get this as there’s so much work gone into everything else, and the first thing most Scale rigs or crawlers have done to them is wheel weighting and improvements in weight bias. It’s a cheap and easy mod that can transform the way a rig ascends an obstacle or drives up a steep incline.

TRX-4-Canyon-Trail-Tire-wheel
The wheels look scale. The tyres work epic…but why oh why glue them? Beadlocks would have added that additional tuning aid that weighting wheels brings.

Again, why, oh why not let the end used decide this aspect of the rig. Offer beadlocks and show in the manual what weight biasing will do to the way the rig handles. More on this later…we have experimented and the findings are as we suspected.

Enough Waffle, Time 2 Test The TRX-4!

Traxxas and Logic RC kindly sent me one of the first rigs to hit UK shores and we did a live unveiling of it at the recent UK Recon G6. Brian Parker hadn’t even seen one up until this point and the general consensus of opinion was very, very positive. But as we had three days of event to run, and over 300 drivers in attendance, it was hidden back at my accommodation and I waited to run it properly the following week. I also enlisted the help of an impartial test driver, Mike Worthington, who’s been a part of the Scale and Crawling scene a while, and lives near me in Solihull. I wanted more than one opinion, and then could offer you the reader a slightly different perspective on the rig in use.

TRX-4-underneath-body-on
The wheel wells/under arches are sublime. They add another level of detail sadly missing in many rigs on the market today. 10 out of 10 on this aspect Traxxas.

Over to Mike (and his son Maximus!)

Maximus & I…

A few of you may know me but the majority will not, you may have seen my son Maximus and I on Instagram or some other social media platform, or we may be completely new names to you, either way I will take just a moment to let you know who we are.

18985481_10155228735851397_592020575_n
Maximus…or “Little Scaler Dude” as RCCZ calls him! (PS: we love the Slimer jumper too!)

I have been enjoying the RC hobby for many years, my first RC car was a Tamiya Blitzer Beetle but my first memory of RC was chasing my Dad’s Tandy Landcruiser around the garden in the 80s as a child, my first scale crawler? I got back into the hobby while I was at college, discovering the online community and eBay, meaning I could get the Lunch boxes and Monster Beetles that I had wanted as a child. My Tamiya collecting allowed me to amass quite a few RC cars which in turn have been ‘traded’ into my current fleet of mainly scale crawlers and off-road bashers.

19024818_10155228735831397_1223519293_o
Thats the look of a happy RCCZ guest reviewer/driver…(Well two, or three opinions are better than one!)

Amongst my collection I have had a few Traxxas vehicles and their out of the box readiness to be run has always been appealing to me, don’t get me wrong I love building rigs and I have built a fair few, but occasionally it is nice to open a box, charge a battery and hit the trails, so when I heard about Traxxas releasing a scale vehicle, I was keen to know more.

This article covers my expectations of the truck vs the reality of seeing it and running it for the first time with my son. I will touch on some of the features and things that are ‘different’ from other trucks currently available and talk about potential flaws or merits of the TRX-4.

TRX-4-3qtr-chassis
The wait was worth it, the real rig lived up to nearly all the hype!

Waiting 4 The TRX

When Traxxas announced they were releasing a scale off-roader, I instantly had some ideas as to what I wanted it to be, mainly based on my experience of owning a summit and seeing people on line converting them to scale-ish looking rigs, I hoped Traxxas had taken note and utilised some of the features from the big monster that the summit is, and well I wasn’t disappointed, they have lifted the remote locking Diff’s and the hi/low gear selector, (which Traxxas featured on the first EMaxx trucks years ago) and put them in the TRX-4 but they had also added some new features like the portal axles and the ‘cruise control’ function which I was keen to learn more about.

82056-4-TRX-4-Action-8
Regardless of surface the tyres and lockable transmission just generated grip and traction.

Some early reports I read online were that the vehicle was larger than you would expect, which is common with Traxxas vehicles, their 1/10 vehicles are often closer to 1/8 like the E- Revo and the Summit, but this isn’t the case with TRX-4 it’s not too different in size to my Gelande2 and SCX10s with a 324mm wheelbase, it sits slightly higher (291.6mm) but that’s partly down to the officially licensed Land Rover Defender 110 body shell with its roof rack and off-road styling.

Aside from the size it’s a great looking rig, the scale details are there with the functional spare wheel on the back, the gas can and jack, the exterior roll cage, the fender flares, the replica winch (which can be replaced with a functioning one, I have seen RC4WD test fitting their range already online) and the snorkel which all add to the aggressive modified look of the vehicle, the blacked out windows don’t offend me personally but I’m sure people will cut them out to install some scale interior.

Turning the truck over, the first thing I noticed was the floor pans and wheel wells which provide a good scale appearance, but also will stop some of the muck and debris from entering the model.

TRX-4-chassis-bottom
Look how well the underside is protected. The skid and side mouldings helping to work in conjunction with the wheel wells to stop dirt and debris getting inside the cab area

The other thing I was drawn to were the portal axles, Traxxas’ method of creating more ground clearance but also reducing torque twist by using the portals to put the gear reduction right at the wheels. The portal axles also improve the geometry of the chassis by allowing the links and drive shafts to run almost parallel with the centre gearbox, reducing strain on the drive shafts and links, the steering links are also higher as a result reducing the chance of getting caught up when driving off-road.

For the test run we were using a Traxxas 5000mah 3s 11.1v iD Lipo battery which fit the chassis perfectly, as you would expect, the battery holder bar can be rotated to hold either a 23mm or a 26mm battery, I was using the 26mm option, also worth noting there is a recess in the battery compartment which allows for the use of smaller battery packs which is common in the scale world, a big thumbs up for me in this department is the fact that the battery bar is attached on a hinge and there are no body clips used.

82056-4-TRX-4-Action-5
Yes its waterproof, very waterproof!

The ESC is an updated version of their XL5 model, it’s now called the Trail-tuned XL-5 HV which is now capable of running up to a 3s lipo, it’s still waterproof but has the added benefit of new driver profiles such as Trail Mode, to allow for smoother slow speed driving offering a drag brake in neutral, whereas Crawl mode replaces neutral with instant reverse but also offers 100% hill holding brake, which will be useful on technical courses.

2075X-metal-gear-servo
High Torque, Metal Geared, Digital and Waterproof…The servo works very well in most situations, but as ever we felt a little more torque (say 20kg total) would take it from good, to great.

The top of the chassis also provides visibility of the micro servos used for the locking Diff’s and hi/low transmission control, much the same as the Summit, but one thing different here is the use of cables as opposed to rigid metal arms. The cables allow for smoother movement and more articulation of the chassis. The other noticeable change on the chassis is the grey standard sized servo for the steering, the 2075X is mounted high between the front shock towers and appears to be an impressive component, with full metal gears, this digital servo is also fully waterproof.

Running, Climbing & Crawling

By now my son is more than ready to try the truck out, so we powered it up and put the shell back on ready to test it on the rocks at the highest point in Warwickshire. Almost immediately you notice the speed of this crawler, in hi gear it will exceed 10mph (according to vids on YouTube) thanks to the Titan 550 21t brushed motor, it reminded me of the first time I ran a Tamiya CC01 chassis with the stock 27t motor installed. Switching to low gear provides a more scale speed for the rig which I used along with both diff’s locked to negotiate the out crops of rock we were crawling over and It did well, the suspension was just soft enough to allow the tyres to maintain contact with rocks, occasionally as a result of the lightness of the wheels and axles I had to wait for the vehicle to settle before applying the throttle.

82056-4-TRX-4-Action-10
Side hilling was affected by the heavy exo-cage and higher than expected C of G. Weighted wheels counteracted this perfectly in later testing.

The 1.9 Traxxas Canyon Trail tyres also performed well both on the rock surface, the mud and in the loose dirt we were driving on, check the video out to see them in action! The only thing I would prefer here would be bead lock wheels, allowing the option to add some much-needed weight to the wheels, without boiling or peeling the tyres off the stock rims. I am sure some people will swap out the wheels and tyres for this reason, as the only thing which created a problem and prevented me from not keeping up with the modified Vaterra Ascender and modified Axial SCX10 that were being run alongside the TRX-4 during the test, was its high centre of gravity.

One feature I didn’t test was the ‘cruise control’ option, partly because I like to maintain control of the throttle of my vehicle, but also because I feel that Traxxas are relabelling something that almost all RC vehicles have the ability to do already, so they can’t claim it’s a new feature. The cruise control is simply adjusting the trim on the throttle on the transmitter, to trick the esc into driving forward without you touching the trigger. I used to do this on my old Tamiya to help me get action shots.

I only put a single battery pack through the truck so didn’t put the chassis to the test with regards to strength and durability, but that being said, I did run it well over 1.5 hours and it feels like a well put together truck with quality parts. It has adjustable, oil filled, coil-over aluminium GTS shocks which were created specifically for the TRX-4, the steel links are large diameter and look like they will take a lot of abuse. The rigid steel ladder style frame offers multiple mounting points for the rear shock tower, allowing the option to change the wheelbase to accommodate for different bodyshells, you can choose 300mm, 312mm, 324mm or 336mm, the rock rails are also adjustable to accommodate different width bodyshells, the bumpers are also adjustable.

18987382_10155228735836397_834325769_o
Just to show the comparison against a D90 Hard body build…the size of the D110 is perfect, but lack of interior or options to add one lets it down on the true scale front.

Traxxas advertise the truck as brushless ready, which personally gives me confidence in the drivetrain, as I like brushed motors in my crawlers, my brushless rigs are for bashing and racing, but knowing that Traxxas have used steel front CVDs, hardened steel rear axles and steel gears everywhere else, means that if I was to go down the brushless route, it would take the strain that brushless set ups put on a gear box and drivetrain with ease.

In Conclusion

So how does the TRX-4 compare to my expectations? I would say it has surpassed them, it’s not perfect, but neither am I and the blacked out windows and high centre of gravity are not enough to put me off wanting to own the truck, the overall package provides a go anywhere truck which will allow people who are not into crawling to experience the slower, technical adventure that crawling adds to the hobby, but when they have had enough of balancing on rocks like a goat, they can open the diff’s and put the truck in high gear and do some donuts and jumps without concern, as the rig is ‘Traxxas tough’.

TRX-4-Defender-Red-rocks-studio (1)
Its a keeper…so more experimentation is imminent, as is a body swap and interior.

My son Maximus enjoyed driving the truck just as much as I did and we will add one to our fleet in the very near future.  Ask me again in a year to find out how the truck has lasted in the hands of a five-year-old but for now, I believe Traxxas have got this spot on, a great truck, at a fair price which will keep up with the best of them on the trail.

The RRCZ video from that day:

Final Words From Mr Gray

A huge thanks to Mike for his help and his opinions on the rig, and just to conclude this review here’s my findings having myself now run 5 full packs through it. First, it’s definitely a keeper! In 100% stock form it runs trails perfectly in high or low range and the ability to switch between the two on the fly is liberating. It does wheelies and can even jump pretty well if the terrain allows (on both 2 and 3S!), especially if you run on a high grip surface. I fell short of attempting a backflip, but was very, very tempted!

82056-4-TRX-4-Action-3
One of the most capable RTR rigs we have ever run and reviewed. Its minor niggles aside, the Traxxas fulfills most of the Scale or Trail needs any end user would have.

If crawling on rocks or up steep inclines, drop offs or side hilling over say 40 degrees, the heavy Exo-cage and body does come into play. The C of G isn’t perfect for the kind of things we attempt with many of our rigs. If I was a conspiracy theorist I would say that on many of the official video’s they are running weighted wheels, but that said it did remarkably well in stock form all considered. The trick is to drive it like you would a hard-bodied rig. Let the suspension settle and the weight relax and then drive through the odd floating wheel or almost-but-not-quite tipping over incident. If you drive it like an Axial SCX-10, you will tip the rig over on some obstacles. But take your time and learn its abilities and it will reward you by actually achieving lines that at first seem pretty much impossible.

TRX-4-light-kit
The optional light bar and lighting kit are our next purchase…night runs R us!

Remember when testing this rig initially we ran an Axial SCX-10 and a Vaterra Ascender at the same time, in a game of cat n mouse and follow the leader. It made most of the climbs and crawls but the C of G did hamper its abilities. I added a set of weighed beadlocks and the rigs abilities improved no end. It’s the one must do modification and tuning aid that takes this rig from very competent to extremely proficient!

Benchmark Set

Compared to the SCX10.2 and the Vaterra ascender its locking and unlocking diffs are the game, set and match winner. There are times that you need to lock the diffs and climb, and others when you need a tight turn. Flicking between the two states really does make a huge difference. I was a massive sceptic at first, it’s not like using a dig where you physically lock a whole axle and drive the other to pivot around the point the locked axle sits, dragging the rear of the rig like a dog does its back end when you have guests round for tea!!! No, it’s far more sophisticated than that. Leaving the front axle locked and the rear open allowed me to move around certain rocks and turn sharply on climbs right when I needed to. Experimentation is the key here and the more wheel time you get, the better you and the rig become at attempting things.

Traxxas have created a new benchmark in this genre of product. The diffs and driveline features aside, my favourite feature is the Portal Axles. They just make climbing over certain rocks and obstacles a breeze. If I could add any feature to all of my other current rigs and builds it would be this. Traxxas we salute you. The price may seem expensive to some, especially as you also have to provide the main pack and charger yourself. But for a fully loaded vehicle, packed with cool features, a multi-channel 2.4GHZ TQi remote, the future ability to add telemetry and on the fly paremeter adjustment and different driving profiles via a Bluetooth 6511 Wireless add on module and a smartphone app, it’s very good value for money. In fact, probably cheaper than many builds out there already if you factor in the price of a kit and all the components. I’m looking onto alternative bodies for this wheelbase as I write this. I’ve also added weighted beadlocks permanently and will be removing the tyres from the wheels with Acetone to re-use them and keep the intended look.

Now all the team responsible for this product at Traxxas HQ form a tight circle, pat each other on the back hard, and then go get me a shell with clear windows…STAT!

Real n RC
Real and RC…the Traxxas looks huge against our RCCZ Suzuki Jimny…

Likes

· Portal Axles & Ground Clearance

· Remote locking diffs & 2-speed

· Licenced Land Rover Shell

· Tyres Tread & Compound

· Waterproof Electric’s

· Weight Bias of Motor

· Brushless Ready

· Winch Ready

Dislikes

· Tinted Windows Negate Adding Interior

· Not Beadlock Wheels

· High C of G In Stock Form

Some huge thanks goes to Traxxas USA, Logic RC UK and Mike Worthington & Maximus for their help with this review…

Available in the US from: Traxxas USA

Available in the UK from: Logic RC

Double Trouble – Rebel RC

Carisma’s GT24T & GT24TR 1/24th Brushless 4WD RTR Vehicles Tested

Words & Images: Phil MakeItBuildIt Lawrence

Spec

  • 8000kV Brushless Motor
  • Friction Dampers
  • Detailed Rubber Tyres
  • New Full Sized CTX8000 Tx
  • Responsive Steering Servo
  • 1S 3.7V (stock) or 2S 7.2v (Upgraded) LiPo Powered
  • Length 185mm
  • Wheelbase 121mm

UK RRP: £79.99  Global RRP: $109.99

Available in the UK Here   Available Globally Here

Need Another GT Hit

After reviewing the Carisma GT24R, a miniature Pikes Peak replica and thoroughly enjoying racing it around the House, Garden, outside on Tarmac (hell, anywhere I could find an imaginary Rally Course to test it on!). I next wanted to stay with small form factor RC, but with a vehicle that had more Off Road capabilities (Putting it bluntly: I wanted to get some jumps in!). A few phone calls later and along came a small box, it contained both of the GT24R’s freshly born siblings …

The GT24T (Monster Truck) and the GT24TR (Truggy)

Big Similarities – Subtle Differences

Who doesn’t love a cool Monster Truck or Truggy?

Both of these share the same chassis as the GT24R with its fantastic micro brushless power system and well designed and manufactured suspension and steering, however there are a few differences.Apart from the obvious body shell change, the wheels are different too. Larger wheels with deeper and wider tyres, allowing for more grip on the loose stuff, body posts are present but not used and the rear bumper from the GT24R is not installed or needed

Chassis Rear
Underneath the bodyshells the Monocoque Chassis and running gear is the same
Chassis top
The hologram sticker ensures the authenticity of this Cariama product

Unlike many other small scale RC manufacturers who like to offer smaller form factor Transmitters with their products, Carisma have coupled the GT24 series of cars with the very much full sixed CTX8000 transmitter.

Controller
The cars may be small, but the Tx is full sized (and featured!)

It’s both ergonomic (fits the hand nicely), and full featured. It also offers trims for steering and throttle, servo reversing along with an adjustable steering rate thumb wheel conveniently placed on the handle by your thumb (you will see later why this is a good idea).

Good for Kids N Newbies Too

The CTX98000 also comes with a rubber throttle limiter that you can slide over the trigger, so it stops the driver using full throttle. Something that would be useful when you hand the remote to a new to RC driver or young child for example.

Chassis top close
Note the Velcro on the side…no body posts required!

Chassis under close

The chassis is a vented enclosed monocoque design and is super sleek, hiding inside under more than adequate protection all of the electrics  like the fast steering servo, and the 8000kv brushless motor. Keeping little fingers (or big ones) away from any hot or moving parts. (no scorching fingers on hot motors here) alongside keeping all the muck outside where it belongs.

Chassis battery empty
The space under the chassis offers space for either a 1 or 2S LiPo

Sliding open a small hatch on the bottom reveals a very neat battery compartment, which the 1s brushless battery fits in with ease. This is where I made my first upgrade, as I had already tried the GT24R (insert link) on a 1s battery and loved it, but the animal in me wanted more. I thought why not give in and go with a 2s I had ready to slot in, cue big demonic grin!

Chassis Battery Full
Tetris skills required…its tight but possible!

The official Carisma upgrade 2s battery is a tighter fit than the stock 1S offering, but once I engaged my Tetris brain, I found an easy way to fit it. keep the red JST connector against the inside of the chassis, then feed the battery in, the balance lead will fit perfectly at the end of the battery…someone designed this to fit well.

No Slop & Well Designed

Suspension again is remarkably sturdy for its size and I’m still shocked at how little play there is in the joints, especially when you consider how much slop is in some 1:10 scale or larger cars. The advantage to this is that the handling won’t be compromised by lots of play, as even a small movement in this scale could change camber/caster or toe by a large percentage. In short:-

No Slack = Predictable Driving = More Fun

The wheels are kept on the ground with twin wishbone suspension , which does not have adjustable geometry, but does allow 2 different shock mount points both top and bottom, alongside 2 steering arm positions on the hub, neither of which have any bump steer when I tested them.

Chassis under
This could be a 1/10th or even a 1/8th…but its way smaller than that!

For those that don’t know, bump steer is when the steering arms are not designed with the same pivot point geometry as the suspension, so as the wheel is moved up and down it causes the wheel to turn in or out. this makes the handling not so good and is best avoided. Thankfully Carisma have got this right and you don’t need to worry…

DSC05842 copy
The design is tough and robust…designed to be run not looked at!

Shocks are friction shocks with fixes spring rates, although I believe that oil filled dampers are available as an upgrade if its something you wanted to do, along with carbon shock towers and all other manner of goodies.

DSC05841
The stickers on each wheel add additional detail…while mainitaining the strength of a dish

I did my old skool drop / bounce test and if you are racing this competitively, then I would look at the shock upgrade, if you are having fun with it, ragging it about with friends, I would not worry the stock shocks work well.

All of the models are 4WD and pack a differential front and rear, meaning no scrubbing when turning and more grip. There is a built in slipper clutch too, there is a chance I might need it with 2s power!

2s battery
1S is fast, but 2S is ballistic!
charger
USB LiPo charging offers safety for younger users, but remember in some terratories the vehicles dont ship with LiPo or Chargers

Body wise unlike the GT24R, no body mount or pins are needed, instead you have a foam extension on the side of the chassis and Velcro to mount the body. You don’t need to remove the body to change the battery, or to turn the car on and off, all of that is done on the bottom of that lovely enclosed chassis.

As mentioned earlier, there are two body styles, the Truck (GT24T) and the Truggy (GT24TR), it comes to personal choice which you prefer, both offer great visibility and do not affect the handling, means when racing your mates its easier to see which is yours

Ensure Body Sits Correctly

On the GT24T, the first time I drove it I had to move the body slightly backwards to stop the front wheels catching the body on full lock, but that took me a few seconds and was zero hassle to do, this was probably my fault from when I took the shell off for the photographs. It’s likely i did not put it back in the correct location based on the wheel wells, and I had just lined the Velcro up.

DSC05780
Probably the cutest Monster truck in the history of RC

Performance on 2s is blistering and you would have to be a driving god (well better than me) to drive in a standard house sized room at full throttle, I recon it could do a 24th wall of death quite easily !

DSC05847
I wonder how many back flips I can do with it? Only one way to find out!

Outside or in a larger space where you can give the Carisma GT24 its legs, OMG how can something that small manage such acceleration, the top speed is impressive and I would love to know what it works out on scale speed, I’ve now nicknamed the GT24TR “Bluebird”!

Watch Out For Grip Roll

Thankfully the CTX8000 controller comes with a handy steering travel/rate adjust so when you are bombing along at warp factor 5, you can dial down the steering so it’s not too aggressive and induces a high speed roll…. ok, I admit, I found this out the hard way. After belting along at full speed with a massive grin on my face, I turning sharply and let’s just say I stopped counting at 8 flips and started the walk of shame while it was still going.

DSC05766
Much more of a serious Race Stance…The Truggy looks epic!

Testament to Carisma, no damage, apart from a few scratches to the shell, which has to be expected when playing on concrete.

DSC05855
Note how much difference the wheels make to the overall look…

The suspension does a good job of soaking up the terrain, I did find the odd bounce now and again when going over some rougher parts at high speed, but that added to the fun.

We gave it a whole 1 minute before starting doing jumps, yes our resolve was that strong! (now you understand why we take the pictures before driving). These two are a hoot, and the more you have, the better it gets, having 2 or 3 racing round is fantastic fun for not a big outlay.

Verdict: Highly Recommended…can’t wait to see what they do next, a baby Short Course or Rock Racer would be cool. Or even a baby Crawler/Scaler…watch this space!

Available in the UK Here   Available Globally Here

Really Tiny Trucks…Simply Rock!

Pro-Line Ambush 1/25th 4WD RTR Electric Mini Scale/Trail/Crawler

Words & Images Daniel Siegl & ProLine

Available Globally: HERE  Available in the UK: HERE

Length: 198mm

Width: 95mm

Wheelbase: 115mm

Weight: 308g

I always fancied a smaller true Scale/Trail/Crawler rig. But until very recently there was only really one option; the Losi Trekker. Trouble is, that rig was never quite my thing, and it was very much a case of form over function. It looked great but out where it mattered it just didn’t cut the mustard. Also, its basic spec left a little to be desired. The NIMH batteries for example, the weak steering servo and relatively high C of G all combined to make the actual driving experience itself a little unimpressive.

pro-line-ambush-13
About the same size as a Losi…but that’s where the similarity ends!

This aside, more recently ProLine hit the RC scene with its Ambush and RC4WD its 1/18th D90…The latter will be covered in a future article from Peter Gray, the former, I just had to get my hands on and review.

Just Wow…

g2
Leaf Springs For The Win…Literally!

Was my first reaction, finally someone had thought a rig of this small scale through properly. But are they the same axles as the Losi or different? Giving it a closer inspection I can confirm, it is a completely different car – the similarities really only relate only to the size and the fact that they both have an integrated Speed Controller and 2.4GHz Receiver unit – that’s it.

g3
Compact and well thought out electrics placement and weight bias

You’ve probably already read all about the technical details of the rig – So, I won’t bore you with too much of that. This review will be a charge it and run it, hands on affair. After all isn’t that what’s important with a RTR product? Yes many of us eventually modify a RTR vehicle in some way to improve its performance, and also aesthetically to personalize it’s look.

g13
The tiny motor had lots of well needed Torque!

Actually, I will be totally honest here, we had our review sample car back in November, but our friend Brian Parker found so very entertaining and decided to give it a shakedown of his own! That’s why we ended up getting it just after Christmas, used and without any packaging!

2 Hardcore (But Tiny) Testers…

pro-line-ambush-18
Perfect for little (and big) kids anywhere in the World!

I wanted to just look at the rig for a while, its that cute, then go run it myself. But, my 2 girls, one 3.5 and the other 5.5 discovered it for themselves and started the hands on testing for me. The Ambush actually did a great job in this very tough role. After a full pack of running there was nothing broken. I was amazed, as its is finally an RC vehicle that my 2 were self-motivated to play with without prompting. And they keep asking to have more time with it!

pro-line-ambush-19
The rig really does perform well above its obvious size limitations

We tested the car in the last 2 months extensively at a variety of locations:

  • Indoor at Lego Course

pro-line-ambush-25
Forget Ed Shearan’s Lego House…we built a Lego Test Trail
  • On ice on the pond in front of the house

pro-line-ambush-22
Slippy meets Grippy…all together now:- “Ice, Ice Baby!”
  • And finally when the weather allowed, to drive it in Spillern

pro-line-ambush-16
Anything a 1/10th can do…you can attempt with the Ambush!

I have to say, of all the rigs that are in this size, so far the Ambush is clearly the most fun! So much fun in fact that that I tended to push it very hard and attempt things I probably shouldn’t with such a tiny rig, and yes as a consequence a lot of the time it ended up falling over. But when it made almost impossible looking lines it gave you such a feeling of achievement.

pro-line-ambush-5
The added RECON G6 decals help explain whos had our sample and what its been up to!

The leaf springs suspension work very neat, and like all the other Micro rigs out there, the tiny motors performance of course is rather limited. But that has a huge advantage when a child or newbie is driving it, since it is less can be broken!

g7
Considering its size the attention to detail is stunning…

At first glance the electrics seem very unexciting. But having run the rig lots now, my opinion is very positive. I think that even my 3.5 year old could handle the modern and simple USB charger. But fast its not…You need some patience when re-peaking the pack.

g15
Not fast, but safe…USB charging!

Verdict:

The first true small “Scaler” offering the ability to be able to drive it like its a much bigger rig.

g6
Against the included standard sized Tx it looks tiny…because it is!

It’s suitable for both children as well as experienced RC drivers. The included driver model looks right just needs a bit more paint and detail adding to give it more depth.

pro-line-ambush-17
1/10th next to 1/24th….Little n Large

It punches well above its weight and size and offers hope that this size of vehicle, packing much of the performance of its 1/10th counterparts could grow and grow.

g1
So much scope and so well made…huge thumbs up from me and RCCZ for the ProLine Ambush

With RC4WD and ProLine leading the way, lets hope more manufacturers follow suit., and a dedicated Micro class grows from it…check out our running video below!

Huge shout out to ProLine and the global RECON G6 family

See you out on the trails, or at a G6

Daniel

Create…Don’t Imitate

Words: Peter Gray & Dphotographer Danny Huynh

Images: Dphotographer Danny Huynh Archive

Huge shout out to www.RC4WD.com For helping facilitate this article.

Prologue

A few years back I started seeing images and posts online of some of Antipodean RC builder Dphotographer Danny Huynh amazing body shell art and full on build projects. I was simply gob smacked at the intricate detail, the unique approach he put to every aspect, and both the visual as well as mechanical story each one told.

Trying to explain what they convey without actually seeing them is difficult. They have a rare quality in that they are not only visually stunning, meaning you end up scrutinizing each image much longer than most RC posted online, but they are also truly innovate.

IMG_5726 2
I love this image on three levels…Terminator meets Lowrider meets Supercharger

Danny utilizes many stock components in very unique ways. he also adds detail features not usually associated with the original vehicles, like faux Rotary Engines more akin to use in a flight scenario, Machine Guns, Revolving cab sections and much more. Each build usually has a driver figure and or gunner/co-pilot/sidekick present, and these are often animated via linkages and servos to make then not only come to life, they actually look like they are steering/firing/riding. The figures often have a slightly dark Sci-Fi twist.

20161008_154220
I think Logan may have a slightly heavy right foot…But at least he can drive a manual!

From Terminator androids and Wolverine, to what can only be described as undead Sci-Fi Storm Troopers…(and not the Star Wars kind!), they have a look and presence that seem to elevate each build to an even higher level of cool.

No Two Are The Same…

He’s build 3WD chopper-esc Drift Trikes (yes you read that correctly…3WD, Drift Trike) based on 1/5th Thunder Tiger race bike, rigs based on Axial donors, painted some of the sickest drift car bodyshells I’ve ever seen, and more recently done a series of builds based on RC4WD kits, donor vehicles and parts. And these are something else!

20170109_153840
Near the start of a very cool revolving cab/gun rear engine rig…check out Danny’s FB for the finished thing!

I recently got a chance to interview the man himself. We are friends on Facebook, and comment on each others photographs and projects all the time, but I wanted to know more about him as a person. What inspires the man that himself inspires so many to re-visit the art of truly building. An art that for many has been lost, and to a whole new generation of RC fans, who have grown into the hobby with RTR vehicles, run mostly stock.

I do hope this will be in some way a wake up call and an inspiration to you to go and get yourself a kit, and put some of yourself into its build process. But enough of that, onto the interview…

20161222_144628
Note the suspension…Danny uses every part in new and interesting ways

RCCZ: What led you to this point in your RC builds? We want the Dphotographer Danny Huynh Origin Story…when did they go from Cool to Epic?

DPDH: “I’m a documentary photographer by trade and have always had a passion for cars. Not so much the mechanical side of them, but more passionate about the design aspects of cars. So about 5 years ago, I’ve decided to buy my first RC car!

I always wanted to win one while growing up in the 80’s since my parents couldn’t afford one, but hey… Better late than never!

I’ve never really considered my works as being cool or epic. I just do what I enjoy and am thrilled to see other people appreciate it…”

IMG_5589
Gotta love a blower on a big block engine & the RC4WD units simply deliver!

RCCZ: How would you describe your creations? To me they are functioning works of RC Art…They blow my mind and inspire me in equal measure.

DPDH:“I like to describe them as a form of creative thinking, I like to keep them very similar in style, but also different from each build to set them apart. I’ve never called myself an artist. I just stumbled into the title through the use of Facebook.

I suppose it is a form of art to a certain extent, specifically the painting and photography side of it…”

IMG_5066
Yes, that’s airbrushed/painted onto the side panels…amazing!

RCCZ: You seem to see the World in a very different way to most. What’s your favorite film/book? In my head I can see a whole Graphic Novel littered with your builds…what’s inside your head?

DPDH: “Not much goes inside my head to tell you the truth. I don’t read books or graphic novels, I’m more of a music person and must have something on all day, every day while I tinker.

Some of my favorite movies Kill Bill, Blade Runner, movies with alien/s etc., but I don’t see any of those being an influence in my work.

I feel that my biggest inspiration comes from WW2 vehicles. Particularly, the aircrafts during that period which I believe to be the best design in aviation history! “

IMG_5533
This tracked Beast II build wouldn’t look out of place in a Ridley Scott film on a distant planet…full of Aliens!

RCCZ: What was your first ever true RC vehicle? (and did you modify the hell outta it?)

DPDH: “As I mentioned previously, I bought my first RC car about 5 years ago. It was the re-release of the Tamiya Avante and brought back my childhood memories from the 80’s. Back then, it was Tamiya’s design with their Avante and Egress that really got my attention. Even the box art itself was truly a work of art.

Shortly after, I discovered RC drifting and bought a Tamiya VDS drift chassis. That allowed me to be really creative and paint the drift shells in different ways. I think this is where it all really started with teaching myself how to paint drift shells and eventually lead to modifications on the VDS. It was the first of my animated drivers, the Kick Ass action figure!

IMG_5627
Whatever that ‘Bomb’ is on the back (Hydrogen, Confetti, N0z?) it adds a twist to this build that’s simply epic!

RCCZ: If you could build anything, based on any kit, from any manufacturer ever made, no budget restrictions…no scale concerns, what would it be?

DPDH: “I’ll have to go with what I’m building with right now. I have built quite a few different RCs, but nothing compares to RC4WD’s products. Not only do their scale trucks really suit my style of building, but RC4WD provides a great deal of details in all their products. Mainly, their scale chassis’ really brings my designs to life…”

IMG_5666
Ready to take on almost anything…the tail gunner and detail is on another level…Another stunning build

RCCZ: What are the top 3 things you can offer as advice for people inspired to get their own build projects started?

1. Create and don’t imitate

2. It doesn’t have to be realistic, just as long as it works and looks “unreal”.

3. Have fun!

IMG_5732
The skull on thee front grille just adds that finishing touch…

RCCZ: Any insights into your latest projects? Anything we really need to know about you, and the future of PDH?

DPDH: “I try to build a new project every month. it usually takes a month or two for all the detailing and creation to work as one. Currently, I’m working on a RC4WD Gelande 2 with their classic Toyota Land Cruiser Body. It’s a tow truck based on the Zero Warbird with a radial engine. hehe…”

PS: “You might also be seeing another Trike soon, since I’ve been wanting to challenge myself with another 3 wheeler…”

IMG_5538
Nothing would stand in this rigs way…and if it did it would be crushed (mentally & physically!)

RCCZ: Have you ever thought of producing a book about the entire body of your work? I could see it sitting on coffee tables all over the World…especially mine!

DPDH:“I never considered producing a book, but yes, that would be cool. I pride myself as a photographer as that is after all how this all started… you know, painting drift shells and photographing them. I have to snap a photo everyday otherwise I go mad…hehe!”

IMG_5551
Undead Storm Trooper anyone? Pretty isn’t he! and on a very minimal ride…

RCCZ: Last question…Where do you want to see the RC Industry and this vibrant Scale Scene go in the future? Is it still as exciting and diverse as when you first got hooked? Or do you think it needs more people with your drive and vision to push the boundaries a little, and inspire a new generation into getting involved and building using traditional model making techniques?

DPDH: “That all depends on what one loves about this hobby. I know that this industry is constantly growing and has been awesome with releasing new kits and creations quite regular to keep us happy.

The great thing about this hobby is that there are various aspects as to what we each love about it. For me, it’s creating, painting and photographing it. And yes, it “IS” as exciting as the day I discovered it! For others, it can be the racing side or competitive side to it, or both. Whichever it is, we need to keep practicing what we love about this hobby. Practice makes perfect, or at least pretty darn close!”

IMG_5306
One for the VW fans…now this would be one Camper Van I would love to take to Dubfest!

Epilogue

A huge shout out to Danny for taking the time to answer my questions. We look forward to seeing more of his builds in the future. Huge thanks’ also to RC4WD for helping facilitate this, and for more on Danny and his builds check out his Facebook page HERE 

I do hope that for those not familiar with his work it will inspire you to. Its set a benchmark in terms of being so different and taking us away from always striving to create photorealistic builds. Adding in a little weird and using a little leftfield thinking creates something fresh and exciting, and long may that be so!

Untitled-1

Re-living Group B Memories

Tamiya’s Classic TT02 Lancia Delta Integrale 4WD 1/10th Rally Car Kit

Words & Images: Phil “MakeItBuildIt” Lawrence

Available in the UK: HERE & HERE

Manufacturer: Tamiya

UK Distributor: The Hobby Company

UK RRP: £139.00

Spec:

  • Width: 186mm
  • Length: 407mm
  • Height: 159mm
  • Wheelbase: 257mm
  • Gear Ratio = 9.58:1

Required Items

  • 2-Channel R/C Unit
  • ESC may be required, UK versions include ESC
  • Battery Pack & Charger
  • Paint, Tools & Patience

It’s Been Emotional

So, where should I start this journey; when I got the kit, or a lot further back? I’ve been told in the past to start at the beginning , however I’m going to break that rule and start at the end, as I cannot wait to share the finished product with you.

This is the end result of what has been a long journey for me. It has been an emotional journey and one with a variety of feelings along the way, but well worth the travelling .

tt02-img31
A Rally Car of my childhood dreams…Group B was short lived, but Epic!

Back to the beginning

OK, before I show you too much, let’s go back to the beginning, the very beginning, <cue the ‘Wayne’s World’ time travel special effects>

My journey into RC cars started with Tamiya. Without a shadow of a doubt, Tamiya were THE manufacturer of kits in the 80’s. I remember being in awe as my younger self opened the box, seeing all the components and then learning to build the kits. It’s fair to say that more than half of the fun of a Tamiya was the journey before you drove the car.

We live today in a Ready To Run world, and this has its advantages to get people driving quickly. However, there is something lost for me in RTR cars. In building the car up yourself, you not only got a massive sense of achievement and pride in what you have achieved, but you also built your knowledge. Knowing how a car is put together is a big thing so overlooked by the RTR world of today. If you built the car, you understand the car, and I think that allows you to repair, upgrade and tune as you want with confidence.

For those, like me, who have some silver or white in what hair they have left, this should ring some bells. For those younger, I know there were some re-releases of the classics in early 2000’s. The Tamiya cars at the time, for me, were the Hornet, Grasshopper and the Frog, swiftly followed by other character cars like the Wild Willy Jeep.

I still have a soft spot for the F150 Ford Ranger with its aluminium suspension setup and scale looks, as that was one of the last cars of my childhood and was also the car that re-united me with my father after family divorce – RC has a way of mending many bridges by providing a common ground.

My memories of the Tamiya kits were good overall; I don’t ever recall a badly moulded part on any of my kits sprues. Sure, I remember upgrading the friction shocks to oil filled dampers and changing the plastic bush rings for metal ball races in some of my earlier budget based builds.

The thing with this, is that you have to remember where Tamiya placed those kits. They offered (and still do) a range of kits, from their top of the range pro racing kits with all the upgrades in the box as standard, to an accessible entry level kit to get as many people into RC Cars as possible  whilst maintaining a decent quality level as, after all, the experience of a bad model could taint your RC experience and put someone off the hobby.

So you can hopefully understand why this meant a lot to me when I was asked to relive my journey and how would the current models match up to the expectations in my head from remembering my Tamiya roots.

First Glance

OK, back to the near present <more Wayne’s World time travel wavy screen effects and sounds>

Presented with a boxed Tamiya TT02 sporting the legendary 1992 world rally championship winning Lancia Delta Integrale, let’s just say I was quite excited as the memories started flooding back.

tamiya-58570-001
Gone are the days of cool Tamiya box art I’m afraid…unless its an 80s re-release!

On first glance the kit contained not only the car itself, but a motor and speed controller so, in addition to the kit, I added a 9009 Low Profile servo from RC-Core to use alongside my existing Spektrum radio gear and a can of white PS-1 Tamiya paint.

So, I’m itching to get started and having built a few kits in the past and although I stand a good chance of piecing together the car by sight without having too many parts left over, I think it’s best to use the instruction manual with its exploded diagrams, to aid the process. But just before I get into the build zone and delve in with the clippers and a knife blade to clean all the joints up, let’s have a look at the some of the sprues and what you get.

2
Parts N Sprues…Parts N Sprues…

As you can see, the injection moulded black plastic sprues are very well moulded, so they are accurate and have a great finish. These contain all the parts you need, each one numbered so you can identify it easily using the manual and have a relatively simple build process.

A tip for removing the parts is never ever twist them off the sprues, as often that removes a small amount of the part as it comes off. My preference is to use wire cutters and clip the part off close to the part and then use a craft knife or Stanley type knife to or scrape off any mould marks to ensure the very best fitment and look.

tt02-img03
Chrome parts look cool and add an extra dimension to the fine detailing

Chrome and body-coloured parts to add lots more detail and realism to the Lancia

The moulded “bath tub” chassis provides a very sturdy base for the Tamiya TT02 to be built on, and should keep everything inside protected from any stones etc. from the off-road escapades that I know it’s going to have.

tt02-img04
A plastic tub chassis is the backbone to many a Tamiya build…and rightly so!

Wheels and tyres, again have had time lavished on them in the design phase to add more realism with the cross cut block tyres and white rally wheels, ensuring they are both functional for driving and look great if your car is a shelf queen.

6
Rally Block tyres are both realistic and functional…
5
Plastic replicas of the original Rally Wheels used by Lancia

Onto the build

Following the instructions, after installing the centre driveshaft, one of the first parts to build is the differential. For those that don’t know what this is or how important it is, it allows the wheel on each side to turn at a different speed, whilst still being driven forwards by the motor.

This is needed to make it easier to turn the car, as the wheel on the outside of the bend has to travel further than the wheel on the inside. On a 4wd car like the Tamiya TT02 Lancia Delta, it will have a differential at the front and at the rear. without them it would be very hard to drive.

tt02-img07
Meshed and lubricated correctly these plastic gears and diff components work perfectly well, and will last

The differential is made up of a 4 planet gears and 2 crown gears that fit inside the main housing and allow the wheels to to turn at different speeds as previously explained.

tt02-img08
The provided grease is your friend…use it wisely

Tamiya, thankfully for those that have not built a differential or a car before, break everything down into sections and detail the build step by step. Everything you need is included in the kit, and they even put in the required tubes of grease.

tt02-img09
Note the safety remark…”Not Eatable”. That made me smile!

After a few steps (7 if you included building the driveshaft), you end up with the following, a completed differential installed ready for the cover plate.

tt02-img12
Note: the central propshaft/driveshaft spins on white plastic bushes and not ball bearings

You can see in the image above that Tamiya have provided plastic bushings rather than ball bearings with the kit. Ball bearings are available as an upgrade, and its one I would recommend if you want to extend the life of the TT02.

I’m not going to recreate the manual in this review, but hopefully show you enough steps and images that you can be part of the build with me

Before long the motor is installed and the pinion gear mesh with the main drive gear is set by the chassis and motor mount. There is no fiddling to do to get it right. You can see the smear of thick grease that is used to stop dust ingress into the motor and gear mesh, simple and effective.

tt02-img11
The bevel and ring gear mesh perfectly…again a smear of grease will ensure smooth and long life

The suspension and drive shafts are built up. To allow the correct movement, Tamiya have moulded ball joints that you assemble – it takes a hard press to get the balls into the moulded cups, but they go in with a click, then you can bolt through into the steering hub. It goes to show again the accuracy of Tamiya’s moulds and process they use to create the plastic parts.

tt02-img14
Dog Bones may limit steering deflection but they are a classic way to transfer power from outdrive to wheel..

The drive shafts are “Dog Bones”, very simple, very effective, the metal pin that goes through the drive shaft fits into a slot on the axle hub and differential hub. This allows the suspension to move up and down and the steering to turn whilst still transmitting the power from one to the other, and, in turn, driving the wheel.

Progressing Well

tt02-img15
A bird’s eye view of the chassis…it’s getting there but still lots to do

Well the Tamiya TT02 is starting to look like a chassis now. Steering linkages need to be made up and fitted, but it won’t be long before its able to move under its own steam!

Using two bell-cranks and some linkages to the wheel hubs and to the servo (via a servo saver) the steering is done.

So, What’s A Servo Saver?

Whilst some servos are now metal geared, traditionally, servos have plastic gears inside them that drive the output shaft which you connect to the servo horn and, in turn, the steering.

It was quite easy to damage these servo gears by hitting a curb, for example. The force of that impact was transmitted directly back to the servo, so some clever soul invented a servo saver. It uses a separate inner and outer ring and a spring so, if there is a big impact, some of that impact force is taken up by the spring part and the servo gears are saved…

(Lots of modern servos use or have options for metal gears now, however a servo saver can still be a good idea)

tt02-img16
The steering setup works equally on both front wheels and its servo is protected by a servo saver built into the servo horn

Onto The Shocks

One thing to note at this point is the shock absorbers are friction and not oil damped. Whilst that makes for an easy build, it is the one thing I would certainly upgrade. Once you have driven a car with oil dampers and softer springs you appreciate the smoother, less bouncy drive.

tt02-img17
OK, so the shocks are just friction units…but easy to build and maintain for a younger RC fan or newbie into the hobby

Pin Location & Faux Disk Hexes

In order to stop the axle spinning inside the wheel, Tamiya follow the trusted method of using a pin through the axle which goes into a slot on the back of a plastic hex. As you tighten the wheel onto the axle with the lock nut, it presses the hex (with its built in faux disc) over that pin to ensure nothing can slip when you give it full throttle.

Note: Faux disk brakes are moulded into the wheel hexes

Installing the Electrics

Now the mechanical side is finished, it’s time to sort out the electronics. For some this can be a daunting task, but I can help put aside any fears by saying it’s all plug and play, even colour coded.

Neatness is the key to efficient electrics installs

The Electronic Speed Controller provided is far superior to the old three speed wiper speed controllers of my youth and very welcomed. No ceramic resistors to scorch your arm on and a much smoother power delivery too.

tt02-img20
Brushed or in the future Brushless use…the included ESC is a welcome change to brushed only offerings in this level of kit

This ESC is also capable of running both the brushed drive motor that came in the kit, or an upgraded brushless motor, so they have given some future proofing as standard and an easy way to add more power. Tamiya, another thank you from me.

tt02-img21
Yes, I could have cut all the cables shorter and got things even neater but I may need these components for future builds, so why bother?

I’ve not cut and soldered any of the wires in this kit. and although it might look complex or a lot of wires, all I have done is plugged them in, bunched them up and used a couple of cable ties so they are tidy and don’t catch

The wiring is not that hard when you look at it logically…

  • ESC has pre wired switch, battery connector, motor connectors and signal control lead
  • ESC and servo connect to the radio receiver via their signal control lead
  • ESC connects to battery with the attached power lead
  • ESC connects to motor (2 wires for brushed, 3 wires for brushless, all covered in the manual)

With a little planning and some cable ties its simple to bundle the wires up to keep things neat. My personal preference would have been to cut and solder the wires so everything is super neat, but I wanted to build this as I would have built it in my youth.

The Completed Chassis

tt02-img22
A worm’s eye view of the underside of the chassis….protective and smooth

The underside of the bathtub chassis will protect the components and keep everything nice and safe.

Looking good topside, foam bumper installed to help absorb any impact from when we rally this about.

Now to start the most daunting bit for many builders…the bodyshell!

That is the chassis and electronics build done. I have tested it driving about inside the garage and once i had reversed the steering channel on my transmitter, all was good. Those tyres give massive grip on carpet tiles, so should make light work of propelling the Lancia forward on tarmac or loose surfaces.

Group B Body

Painting a body is an experience, and one I think everyone should do at some point; not only to get something personalised to themselves, but it’s another skillset and well worth the time invested in learning.

tt02-img24
The Window Masks and Bodyshell ready for prep work to begin

Before you start, you need to cut out shell. As it comes in the kit, there is some excess material on the wheel arches and around the sills/bumpers. I would recommend investing in some curved scissors for Lexan. They make the job a lot easier. Take your time, follow the lines on the shell and all will be good.

Tamiya provide you with a set of window masking templates for the Lancia and you have to cut these from the sheet yourself, following the guide lines and then stick them inside the windows.

Please remember at this point you are going to paint the shell from the inside. The reason for this is that you are much less likely to scratch any paint off as you’re throwing it down gravel tracks and off road. The outer shell of Lexan will, thankfully, protect your paintwork.

After following the instructions of cleaning the inside of the shell and fitting the window stickers, you can then beak out the spray can.

tt02-img25
Wash and dry the inside, then apply Window Masks, making sure they are rubbed down perfectly at the edges to stop paint bleed

Keep the layers thin, there is no rush and if you put on a big heavy layer, it’s much more likely to run.

A good tip, besides ensuring you’re spraying in a ventilated area with adequate protection, is to warm the paint can in some hot water. This allows the paint to flow better and gives you a more even coat and a better finish.

White is the new…well, white actually!

Once you have enough layers on and good even coverage, you can let it dry (I recommend overnight in a warm place) and then remove the window masks. Almost done (well nearly)

Stickers, Decals, Detail…

I find building quite therapeutic and  spraying is too, for me. Stickers … well it’s a love and hate from me. I want them to be perfect and whilst I enjoy putting them on, there is a lot to put on to this shell. This can be a bit daunting and with one thing and another that was going on in my life, I let this delay the build for far too long.

Taking the bull by the horns and using the old trick of some washing up liquid and water in a spray bottle to allow you to slide the stickers into position, I set to it.

Use a well diluted mixture of washing up liquid and water to help the decals slide into the correct place…then use a cloth or sponge to set in place

I chose a sticker to start with which was one of the rear quarters, and cut out the stickers a few at a time from the multiple sticker sheets

If you spray the outside of the shell (don’t forget to remove the overspray guard film first) with a mist of water with a little washing up liquid mixed in, it will allow you to slide the sticker into place and then squeegee the water out from under the sticker when you have it where you want it.

I found for some of the stickers, as they have to go over quite large areas of complex curves, that a little heat from a hairdryer make it easy to stretch the sticker into any inside curves or allow the sticker to shrink a fraction so you did not end up with any crow feet lines.

Take your time and things will end up just fine…think of it as a form of Sticker Therapy!

As there is so many stickers on this shell, don’t try and do it all in once, work through them in the order that Tamiya have put on the instructions and before long you’ll have a highly detailed model.

There is a small amount of painting to do on the grill shell and mirrors; I used black acrylic paint and brushed it by hand rather than masking and,  as for the rest of the stickers, it’s just a case of following the instructions and building they layers up.

As you can see, multiple decals are used to build up the correct look

Some of the stickers, like the red line on the grill, are very thin and you need to be mindful when cutting them out. Overall, I stopped counting at 120 separate stickers on this shell. But I love the end result, it’s a fantastic scale look, and Tamiya have surpassed themselves here.

I needed a Martini after this lot! Shaken and not stirred of course!

 

Reliving Past Rally Glory…in 1/10th Scale!

Having spent a lot of time driving tuned cars with brushless motor and oil damped suspension, I need to make clear that the Tamiya TT-02 is sold  as a starter car with a highly detailed replica body.

Performance of the brushed motor surprised me, it was as good as I remember them to be, quite happily spinning all 4 wheels on loose surfaces with the cross cut tyres biting into the dirt, throwing it rearwards as they propel the Lancia forwards. The speed controller was another improvement, allowing much more control than the old three speed wiper system.

tt02-img32
Love this colour scheme…pity its part of the past liveries of motorsport

I’ve mentioned a few times about the suspension, and I will say for approximately £20 you can get a full set of oil filled dampers, and it’s the one upgrade i would do. The standard shocks do what they are designed to do however, with the strong springs, it does make the car bounce about after a jump or on very rough terrain. On a smooth or relatively smooth surface, its a hoot to drive, and on gravel the Tamiya TT02 is quite capable of sliding and drifting about, more like the full size Lancia Delta.

It’s a fun car to drive and the overall package is so much more than just the drive; it’s the journey from opening the box, building, painting, stickering, finalising with the driving or displaying; whichever takes your fancy.

Building a Tamiya kit is a journey, no, a rite of passage that everyone should take, at least once…Who knows where it will lead you?

Available in the UK: HERE & HERE

Manufacturer: Tamiya

UK Distributor: The Hobby Company

Punching Well Above It’s Weight!

FTX Outback Tundra 1/10th RTR Scale Crawler/Trail Rig

Words and Images: Matt & Madison Ellis

UK RRP: £154.99 Available In UK: HERE Distributor: CML Distribution

Specs

  • Length: 416mm
  • Width: 200mm
  • Height: 230mm
  • Wheelbase: 250mm
  • Weight: 1350g
  • Gear Ratio: 1:88
  • Tyre Diameter: 105mm
  • Wheel Diameter: 54mm
  • Ground Clearance: 76mm

The term “Scale” can often be confused with the word “Expensive”. While it is true that most RTR offerings in the Scale/Crawler/Trail world are usually in the £350-£400 price bracket, a few companies have got wise to the growth in interest in this genre of RC vehicle and have released sub £200 RTR rigs that work just fine out of the box, but have the potential to be taken to another level of realism and performance, as and when the mood takes them (or cash resources allow). People often forget to just drive a new rig and enjoy it for what it is. They dive in and modify the heck outta them before actually learning how they handle straight from the box.

gallery6
Under £160 all in? Unheard of in Scale circles for a RTR…

Good Call CML

When I first spotted the FTX Outback press release and the prices, I had it in mind that this rig would be perfect to get my 8 year old daughter in to the hobby. So when the opportunity came my way from RCCZ to get my hands on one to review I jumped at the chance. With all that in mind though how do you fairly review an entry level product without comparing it to the more expensive rigs myself and the rest of the RCCZ crew often run. So rather than me review the Outback with all my old head preconceptions, I handed it to my daughter Madison for her to review as her first true Hobby Grade RC car. That’s a pretty big moment in anyone’s life…I hope you enjoy coming along for the ride with us!

gallery5
The traditional format of Scale Rig has been followed…from a Ladder Chassis to 4-link suspension

Before I hand over to Madison I don’t want you to think for one minute that this rig is some cheap entry level tat, the spec sheet would give a lot of more expensive RTR’s a run for their money. The Outback is Waterproof out the box and comes with aluminium suspension links and steering hubs as standard, the Outback also benefits from a 3 gear high torque transmission, locked front and rear axles and oil filled shock absorbers. Its also includes a very sturdy bumper (good enough to mount a winch without modification or strengthening and something I really was not expecting for this price; LED lights front and back (My double the price point Axial rig didn’t even come with them).

Unboxed N Dissected By A Discerning Consumer!

So the Outback has an impressive spec sheet but the proof for this little rig would be how it drives. So I put it in the hands of Madison here is what she had to say about the Outback I will give you the old head verdict after you have viewed the Outback through the eyes of a kid who hasn’t been worn down by bad RC purchases and told what she should N shouldn’t like…This is verbatim and in eight year old speak, so bear with her!

IMG_0662
The rig definitely punches above its weight in use…

“My name is Madison and the Outback is my first ever RC car. The first thing I liked about it was its soft tyres and the colour, its Blue and I really like the colour Blue! After my Daddy charged the battery we went to the local park because there are lots of hills there.

At first I thought it was a little bit fast but when I got used to it I found it really nice to drive. We got to drive through mud and puddles which was fun, we got to drive over an old tree which had fallen down. My Outback was able to follow my dad’s truck everywhere his could, even up this one really big hill (but daddy’s car got up first as it can go faster!)”

IMG_0665
Anything Dad can do, I can do just as well!

“I really liked the Outback because daddy and I got to go the park and have lots of fun together. The thing is, when he goes Drifting, the cars are too fast and hard to steer and I can’t really have a go. I really like driving the Outback we are charging the battery again ready for the weekend…”

That’s What Madison Thought…Now My Go!

Obviously when we were at the local park she also decided that she wanted to go and have a play on the swings (she’s 8 after all!) which meant dad could eventually have a turn with the new rig. And I have to say I was really impressed the Outback. For its price it’s a very capable little rig, even if at first you may think its not built as sturdily as others in the class…that’s just misguided preconceptions.

gallery15
The included 2.4GHz radio serves its purpose well and is both ergonomic and light in the hand

OK, so the throttle is a little punchy compared to other Crawler ESC I’ve used, but once you get used to the handset you have pretty good control over the power delivery. It is a little smaller than the likes of the SCX10, but its size doesn’t hold it back and once you get how it feels to drive,  it can go pretty much anywhere my SCX10 does.

gallery3
That tiny 370 can motor does struggle at extremes of terrain, but the rigs light so there’s a balance in the Force

Granted, some things can be a little more of a challenge as its only got a 370 can motor fitted, but I enjoyed that, it’s rather dull being able to get over everything with no effort. The Outback makes you plan your route a little more, which I liked. It’s back to basics RC and that’s what the industry needs more of at the moment.

gallery10
With true 4-link, double-triangulated suspension and a bumper sturdy enough to mount a winch…you simply can’t go wrong!

Scaling The Reservoir

We took the Outback out for a second run at Edgbaston reservoir. I really wanted us to give it some abuse this time, a torture test if you will, and truly test the limits of the outback. Madison went first and put the rig through its paces with ever growing confidence in both her abilities to drive it, and what it was actually capable of.

IMG_0679
This is what Trail Running and Scale Crawling is all about…the big and great outdoors!

Taking it through streams and over rocky waterlogged terrain, the FTX proved itself to be most definitely waterproof. She had it almost fully submerged at one point and it just kept going! When we hit certain boggy muddy patches the FTX struggled a little bit but we were getting towards the end of the battery run time, and being a NiMH its lost its punch, so that wouldn’t of helped. We re-charged the pack back at the car and I had a go myself and this led to me making a few conclusions of my own and also recommendations for end users of the rig.

Biasing Things Correctly

After this review I was going to swap out all the electrics for Madison, but to be honest it is fine the way it is. the battery life is okay, exactly what you would expect for NiMH battery, but the ESC is also capable of taking A 2S LiPo cell, so that’s a logical (and cheap upgrade). Also changing the location of the main pack to over the front axle under the hood is another that will drastically change the rigs weight bias and let it tackle steeper inclines and pull itself up and over certain obstacles it struggled with before.

gallery12
Changing the main packs position from rear to forward, improved the rigs abilities even further

Sadly as the wheels and tyres are pre-glued no weight can be added unless you attempt to de-bond and then re-glue them…not and easy or pleasant task. I wish they were beadlocks, but that would probably have added £20 to the RRP so I get why FTX have gone down their chosen route. CML Distribution sell a vast array of hop ups and after market bits for scale rigs and crawlers, so you could buy another set and weight them yourself with stick on strip weights.

gallery14
The three variations on wheel that FTX uses on the whole range…The Tundra has the most Scale of the lot as standard

Small But Plucky

As for the motor, it may be small, but the 1:88 gearing used is spot on for leisure crawling, trail running and having fun. The 370 sized brushed unit packs just enough punch to do what it needs, but it can struggle at times when the transmission is under duress, solid axles and drive shafts tend to put a lot more strain on motors, that’s why 540 can and high wind is the usual industry standard. Big torque usually requires big magnets. I live in hope that someone will come out with a third party motor plate to accommodate a 540 can in the future, or CML may get in a high torque, waterproof 370 can Brushless, Sensored combo designed for crawling? But again all that will push up the initial or future costs, so until then it stays as it is!

gallery2
I wasnt expecting LED’s as standard…that shocked me!

Big plus point for the Outback though is the minimal cost of upgrades. There are lots of little aluminium bits (Bumpers, Gear Housings, Battery Tray’s etc.) you can add to the Outback or any of its siblings that won’t break the bank. So it’s also a rig that can be improved as you feel necessary. Spares are also very well priced so should you break something when you are testing the limits of the FTX, you won’t have to spend a fortune to fix it.

gallery9
Nice and bright too…FTX lead, others follow

One thing to mention is that the bumpers have been designed in a way that they flex very slightly, but are strong enough to bolt a RC winch to and the rig will be comp ready. The supplied Tx may only be 2-channel, but you can get key fob remote winch controllers that uses Bluetooth to spool out and pull back in the cable, so that’s not biggie!

Quick Fixes

I will swap the servo horn for an aluminium one but that is me being picky it is something I always change straight away even in more expensive rigs. I will definitely upgrade the main pack for a brick pack LiPo, as the ESC is compatible and move it forwards on the chassis. This will increase the run times and add some weight bias over the front wheels. But that is about it really…for now!

gallery11
The main NiMH pack is smaller than a traditional ‘Stick Pack’ so easy to re-locate

I think if you are on a budget or looking to get your kids involved in the hobby you really can’t go wrong with this offering from FTX. CML have something in this range of rigs that many other brands don’t…true value for money RC, and that I feel, as do many on the RCCZ team is the future of helping the hobby to grow again both here in the UK and globally.

IMG_0676
The sub £160 rig next to my nearly £400 Axial…and they both managed the same things in testing

Yes, it will get criticised by the keyboard warriors on forums who like to stay loyal to whatever brand they are fan boys of, or those that only run high end kit, and often take things far too seriously. Yes its got a small motor, yes it has a all-in-one ESC and RX, and yes it only has a 3KG steering servo. But its light, and all the components work well together as a consequence.

If you stop and think for a second its not designed for someone wanting the pinnacle of a RTR Scale Rig. It’s a product that’s been designed to put a smile on a kids face, or as an adults first steps into true hobby grade RC, for the price of a gaming console. And it its very much fit for purpose on that count.

My daughter loves it, and I’ve been won over by it. For its price point it simple can’t be beaten…the gauntlet is now firmly laid down, I hope a few other manufacturers see the light and we see more sub £160 RTR rigs enter the market, but I doubt it somehow. I think FTX hit the nail on the head with this and the other variations in the Outback range.

IMG_0670
As a first Scale Rig, or for a child to get into RC it’s perfect…hats off to CML for bringing the Outback range into the UK

Now go get your own Scale Adventure, and we hope to see you at the UK RECON G6 in May and our own RCCZ Scale Nationals in the Autumn.

For more information on the whole range head: HERE

And for all things Scale, Trail, Crawl and Bash…keep your eyes peeled for more RCCZ articles very soon. We have some very cool stuff lined up!

Sharpening The Shovel…

RCZ_Bash 100

Axial SMT10 Grave Digger – 1/10th Electric 4WD Monster Jam Truck

Part 1 : Digging Up The Past & Dissecting SMT’s Future

Product ID AX90055 UK RRP: £385.99 Global: $399.99

Available In UK From: WheelspinModelsport & All Good Hobby Stores

Available in US From: Tower Hobbies & All Good Hobby Stores

Specs

  • Length: 483 mm
  • Width: 335 mm
  • Height: 269 mm
  • Wheelbase: 353 mm
  • G Clearance: 73.7 mm
  • Weight: 3.2 kg

A Mind Boggling Global Following

5
The Grave Digger most of us know and love…but there’s been many, many incarnations before this!

The name Dennis Anderson may not mean anything to a good proportion of you reading this, but I bet most of you have heard of his 4×4 creation, The Grave Digger. Probably the most Iconic Monster truck of all time, and one that many of us have owned at one point in one form or another. From various Mattel Hot wheels 1/64th die cast push along toys to Traxxas 1/16th RC, New bright 1/10th RC and now Axial’s latest 1/10th RTR trucks. It’s been a vehicle that’s inspired kids of all ages with its colour scheme and eerie almost Halloween-esc looks into performing huge real (or imaginary) backflips, jumps and power slides, not to mention crushing other cars! Hell, I even gave my kids official Monster Jam ‘plushie’ versions of it and other Monster Jam trucks to play with as infants…but more on that later.

0.5
The man himself, Dennis Anderson…Still wowing crowds today with his all or nothing driving style

Mud Bogger to Car Crusher

The origins of the now legendary black and green 1950’s Chevy Panel van started in 1982 with a very different look and model of vehicle. The very first Grave Digger was actually a bright red 1952 Ford pickup truck and was built as a Mud Bogger. Dennis then progressed onto a silver and blue 1951 Ford Panel Truck, and this would become the first ‘official’ Grave Digger Monster Truck, and the rest was history.

2
A modern tribute to the early Ford panel van that was the first true Grave Digger

The truck was named Grave Digger when Anderson said the now famous line:-“I’ll take this old junk and dig you a grave with it…”. Not just Trash Talk to put the other drivers off, but also pretty factually correct about his old pickup when compared to the other drivers pretty modern rides. Anderson fast built up both respect amongst the o0ther drivers and also a reputation amongst the public who attended these events with  an all-or-nothing, 100% committed driving style.

Grave Digger monster truck. Photos courtesy of Feld Motor Sports
Now this is old Skool…still very much a Mud Bogger in its look…but very cool never the less

His transition from Mud Bogging to becoming a Monster Truck happened overnight. He was competing at a show, when the scheduled Monster Truck failed to show up and perform Car Crushing for the expectant crowd. Anderson, who already had large tractor tires on the Grave Digger, offered to step in and crush cars in it’s absence. The promoter accepted and Grave Digger was given a shot. He was an instant hit with the crowds and this was the catalyst for his, and the trucks future career as a fully fledged Monster Truck.

The Digger Look

In 1986 Grave Digger first received its famous graveyard paint livery. It was still a Ford at this point, and until 1988 Anderson mostly drove the truck at TNT Motorsports races. Despite his team still lacking the major funding that teams like Bigfoot had, he won over the people that really mattered, and quickly became a firm favourite with the crowds and growing numbers of fans of the genre.

Then in In 1987, he truly made his mark. Grave Digger beat Bigfoot in St. Poodle, MN on a show taped for and then shown on a very new ESPN. It was just what he needed to take the truck, and his team to the next level, both in its design and to help generate additional funding.

7
Wild runs have always been a trademark of the Grave Digger bloodline…But backflips were incorporated in the last few years

Anderson then built Grave Digger 2 in 1989, with a new 1950 Chevy panel van as its body and everything the team had learnt put into the mechanics. It was during this time that his reputation for making exciting and even ‘wild’ passes in Grave Digger was born. The popularity of Grave Digger when crazy. TNT realised what an icon the truck and Anderson were becoming began promoting them heavily, especially for races on the now legendary ‘Tuff Trax’ syndicated TV series.

Evolution Of Species

TNT became a part USHRA in 1991, and Anderson began running on the USHRA tour and debuted his first four-link truck, Grave Digger 3. The rest was history. In the 1990’s, the popularity of the truck grew so much that Anderson hired other drivers to run multiple Grave Digger trucks at various events across the US. Grave Diggers 4, 5 and 8 were built for just this purpose. Anderson drove Grave Digger 7, a direct successor to 3, for most of this decade. It was eventually replaced by Grave Digger 12, well known as the LWD (Long Wheelbase Digger) which was also the first Grave Digger to have purple in the paintjob.

3
The most Iconic Monster truck in the history of the sport…and now you can own one!

In late 90’s, Anderson sold the Grave Digger team to Feld Entertainment Motor Sports, the current event organiser of the Monster Jam series of events that travel globally to this day. Anderson continues to drive Grave Digger and still is the most visible member of the team. The truck recently had its 30th birthday and competed with a special livery. Fans still flock to see the truck at every event it appears in and regardless of the latest team, or truck to appear on the scene, Grave Digger will always capture the public’s imagination, on and off the track.

4
The 30th Anniversary livery…and no better way to celebrate than jumping a few cars and school busses!

The SMT-10 Platform On The Slab…

So what is an Axial SMT-10 rig then? Well, for a start there’s the obvious Monster Truck inspired body shell, and this one happens to be a licenced version of the classic Grave Digger.  And I would bet that there’s more options on the way, as let’s face it, why create such a cool Monster Truck platform and not create Axial’s own fleet of 1/10th replicas to please both the hardcore Monster Jam fans, and the existing RC bashing brigade.

13
That unmistakable stance and livery….a great scale realisation of this genre of truck

Of all the genre of RC Cars out there, the Monster Truck has the widest appeal by far. You can in theory run it just about anywhere. It takes lots of abuse, and where a thoroughbred 4×4 race platform would probably break in two…most of the time a well-designed and made Monster Truck just keeps coming back for more. It’s no thin cheaply made shell either. Its .040 Polycarbonate and comes complete with a .040 scale interior with driver figure, complete with optional glow in the dark skeleton driver’s head!

21
I love the attention to detail and all the little logos and tributes in the livery

Other cool touches like sweeping chrome ‘Zoomie’ style header pipes, and yet another optional (but included in the box) part, a chromed Supercharger Blower intake and additional engine detail you can bolt onto the bonnet (hood for my US chums!) all add to the look and feel of the truck.

16
A totally new chassis design especially for this SMT 10 platform

Then there’s the chassis and roll cage. In this rig it’s a bright Grave Digger Green, but I would expect it to be black in subsequent releases. It was designed to resemble as closely as possible the modern era full size monster trucks, the chassis was developed to offer maximum strength combined with an extremely detailed appearance. That’s not something that’s easy to do, and most Monster Trucks that came before this release had to sacrifice that very detail aspect in favour of very exaggerated and often frankly unrealistic beefed up TVP chassis. The chassis strength actually lies in the clever way, just like in the real thing, Axial have used triangulation of the chassis tubes, making it ready for just about anything you can throw at it in use. But the features don’t end there.

20
Tributes to its competition? or hints as to future Axial releases? I know my daughters hoping Monster Mutt gets released!

Weight Distribution and C of G

The battery tray can be easily accessed at the rear of the vehicle, without removing the body or disturbing any of the electrics. Yes, it sits quite high up compared to anything Axial have released before, but that’s so the C of G is optimised for the rig to perform and handle just like the real thing.  You want to be able to pop the occasional wheelie, to attempt single, double and even triple backflips. And all of these require the truck to rotate around a fixed point, and one that’s pretty high and towards the rear of the rig.

28
The rear mounted cell tray can accommodate 2 or 3S LiPo cells with ease

Installing a LiPo is so easy. You just remove one pin, swing out the cell tray, and slide the battery pack in. The tray is fully height adjustable with four screws, making room for most standard sized ‘Brick’ 2S and 3S LiPo battery packs. Talking of which the rig is out of the box set up for 3S use, with a 56T Spur / 11T as standard, but Axial Includes a 16T Pinion for 2S use. Now I find this a bit odd as most of us have 2S packs or would start with a 2S pack until we get the feel of any new vehicle. I guess they want prospective owners to jump straight in and experience the additional thrills and spills 11.1v RPM offers, especially when you consider this rig is supplied with a 27t brushed motor so perhaps not the fastest kid on the block running 2S!

32
Yes, the rig comes with an optional drivers Head/Helmet/Skull that will glow in the dark…

Ram Steering

The Monster Truck related design content continues with a new heavy duty tie rod, drag link, and faux scale Hydraulic Ram Steering Link to ensure the massive tyres go where you want them to. Being plastic the steering links are more forgiving than an all alloy setup and offer a little flex in conjunction with the servo saver to help the Tactic TSX45, metal geared steering servo stay intact.

30

At the supplied 5v BEC voltage from the Axial AE-5 ESC the servo produces just under 11kg of torque that for a RTR isn’t a bad g brakes between 100% or 50%figure. AS for the ESC itself, the AE-5 is one of the simplest units in the RC world to use. Its rated for a peak current of 180A with a motor limit of 12t on 2S or 18t on 3S and uses a simple jumper system to set up the desired parameters of battery type (between NiMH or LiPo), and drag brake force (between 100% or 50%).

ax31144_01_800px
THe AE-5 in all its 2 or 3S LiPo compatible glory…

But that’s not all. When you plug in your chosen cell to the pre-soldered Deans connector, the ESC goes through a self-test/diagnostics routine. It automatically sets the throttle and brake end points, and if set in LiPo mode, it checks if you are using a 2 or 3S LiPo. No switching on, holding throttle or brake and waiting for beeps or lights…It’s pretty much fool proof (well, I could use it so….)

22
BKT- official tyre manufacturer of Monster Jam and Axial have reproduced them to perfection

To put all that torque and RPM where its needed most, Axial have produced a scale BKT MOnster Truck tyre. BKT are the official and exclusive tire manufacturer of Monster Jam and its 1:1 fleet of trucks. The full size tyres, just like their 1/10th equivalents have been designed to handle the inherent stresses involved with both ‘Racing’ and ‘Freestyle’ Monster Jam competition.

24
The waterproof receiver box…not that I will be fording any streams any time soon!

The rig also features a waterproof radio box to keep the 3-channel TR325 3-channel receiver safe and dry, if you do decide to go and run the truck in the wet. And thats brings me nicely onto the included 2.4GHz 3-Channel transmitter. The Tactic TTX300 is not your ordinary RTR radio. For a start it has a user programmable 3rd channel, allowing the end user to control almost anything they desire. RC Dig Units and Winches are the obvious choice, which makes this system perfect for the scale and crawling community. But it can also be used to switch on and off LED lighting, onboard cameras and even sound units and other such accessories.  Then theres the SLT (Secure Link 2.4Ghz Technology), which once bound creates an unbreakable link between the receiver and your transmitter. The look is also very unique and futuristic, this isn’t a RTR Tx you will feel ashamed of being seen with!

tactic-ttx300-3-channel-slt-radio-transmitter-tacj0300-arrma
3-Channel, Futuristic, 2.4GHz…whats not to like. At last a RTR Tx that looks cool!

Proven Axles…Beefed Up C -Hubs

The SMT10 features the now proven AR60 axle with a true trailing arm 4-linked rear suspension and also offers additional shock mounting positions. As with previous releases  the AR60 OCP-Axle is injection moulded in a tough composite which has a very low flex rate, but is not as brittle as standard glass filled nylon used by many other brands. The axles feature an Off-center pumpkin design with reinforced axle tubes with a boxed-in axle truss to offer stability and durability. They even changed the diff cover to give them a slightly different look. Subtle but cool.

29

Axial understand that Monster trucks undergo many more stresses than scale rigs or rock racers. So to that end they have strengthened the front C-Hubs to take all the hard impacts and occasional bad landings the rig will endure from monster jumps and good old fashioned RC bashing.

Shock Tactics

Where other brands fit multiple units at each corner to share the load, Axial know their current breed of oil filled shocks can take Monster abuse off road and stick to just a single unit in each corner, far more in keeping with the real Grave Digger.  The chassis offers a variety of shock mounting points for additional suspension tuning options, meaning in seconds you can either lay the shocks down at more of an angle to soften the ride and lower the ride height, or sit them more upright to stiffen the suspension and raise the ride height.

25
Threaded collars make adjusting preload and ride height a breeze

Although the alloy bodied shocks have plastic tops they are very well made and even under the most extreme bashing duress didn’t immediately start spewing shock all from their seals. It is worth noting that as the shock bodies are actually 10mm, and not the 12mm of most of their other shocks, at the moment alloy caps are hard to find as a Hop Up, but once the SMT10 has been out a while and some get released, adding these, with a smear of Team Associated ‘Green Slime’ to each seal will greatly improve the longevity of the shocks between routine maintenance.  Also remember not over tighten them as the plastic caps can strip their internal thread leading to even more leak issues! Just nip them tight and all will be good in the world.

27
Note the Lower Links/Trailing Arms and those epic Zoomie pipes!

Old Skool AX Transmission

In a departure from the recently released SCX10 II transmission, with its optional 2-speed add-on, with the SMT10 Axial instead decided to revert back to the trusty AX10  single speed unit. Initially I was a little shocked by this, but then thought through this trucks intended use and the stresses the transmission would have to endure. Keeping things simple meas that 1: it will take more abuse, even with a brushless setup. 2: tons of spares are available, from hardened internal gear sets and alloy cases to the choice of motor mount and spur gear choice. Its a unit that’s served us well for many, many years and nice to see Axial still utilising it in their latest vehicles. When used in conjunction with the WB8 HD Driveshafts
with their larger diameter cross pin for added strength and a new center splined slider to reduces flex and fatigue its a potent combination…especially when running on 3S!

axial-1-10-scx10-deadbolt-assembled-transmission-1_1024x1024

Anatomy Of The SMT10

Seen from above, the layout of the rig’s chassis and electronics follows a well thought out patten. Weight is evenly distributed, the track width and wheelbase offering stability where its needed and the Centre Of Gravity sitting in a position to offer a fun driving experience.

34

Let’s face it, iid this was the most stable RC vehicle ever invented then its wouldnt mimic the trucks that compete at Monster Jam. I’ll go into this more in part 2, where I put it through its paces on various different terrains, but suffice to say, this shell will not remain immaculate, it will get thoroughly bash tested on both 2 and 3S and I will attempt my party piece, the double (or even triple) Backflip. Until then I leave you with a few more images of the pristine truck…as I eagerly charge LiPo cells and get my official Grave Digger Monster Jam T shirt on…I am so looking forward to this!

17
THe Gravedigger will always be a fan favourite…it’s arguably the most iconic MT ever!

But why does this truck mean so much to me? Well, a few years ago myself and the then RRCi team worked at Monster Jam at the UK events they staged. We did the warm up for the crowd using Traxxas 1/8th RC Monster Trucks (with incidentally, the now head of Axials UK office, Andrew Rawlinson!). Hanging out with all the teams was amazing, we had a great time, even getting to sit in the Trucks and experience the practice runs and event itself right next to the track itself. We even have the blower belt from Grave Digger hanging in Speedy Steve’s garage after he broke it in the final on his very last winning run!

14
I love Monster Jam because I was part of the UK events a few years back!

The driver and team of Grave Digger at that event bet me a mountain of Grave Digger goodies I couldn’t backflip the biggest gap in the stadium (well over 90 feet) in front of the very large crowd, so no pressure there then! Always up for a challenge I attempted it both days as the finale of the warm up. I would position my 6s powered truck at the far end of the stadium and drive it full speed to the take off ramp! 1st day I landed on the down ramp at an odd angle and broke an A arm and bent a shock, plus the rear of the trucks body didnt fare too well either. The second day it actually landed ‘in’ the last crushed car in a line of them just before the down ramp and disappeared completely, to a round of applause from the crowd…

33

I Got My Stash Of Goodies!

Because of the sheer entertainment factor of my attempts (you could hear them all laughing from the pit area!) they gave me my goodies (plush Monster Jam trucks for kids, kids T shirts and one of my most prized possessions to this day, my GD Cap and adult T’s). I still keep in touch with some of the crew on Facebook and I know for as fact they are digging the new Axial in a big way. Oh, and there was also an incident with a certain RC truck and the shows compare…but what happens in Pride Park Derby, stays in Pride Park Derby eh Andrew!

Join me soon for part 2 when we run the rig, test its abilities to the hilt and see if I can get my backflip mojo back! Until then here’s the official Axial video of the SMT10 Grave Digger Monster Jam Truck in action…

For more on Monster Jam and the 2016/17 global tour dates click: HERE

For more on Axial Racing and the SMT10 Grave Digger click: HERE

ho_udwuwhgbjuh

 

 

The RC ‘Kei’ Class

RCZ_Scale 1

Words & Images: Peter Gray/John Wasley/Justine Wasley

Tamiya Suzuki Jimny MF-01X Chassis Kit

Tamiya Website: CLICK HERE

UK Distributor: CLICK HERE

UK RRP: £119.00 (Kit Only)

Specs

  • Length: 347mm
  • Width: 170mm
  • Height: 215mm
  • Wheelbase: 225mm
  • Electric Shaft-Driven 4WD
  • Double Wishbone Suspension
  • Gear Ratio = 9.5:1

Suzuki 4×4 101

Suzuki’s links with 4×4 vehicles dates right back to the year of my birth, 1968…(yeah I’m really that old!). Back then Suzuki bought a former Japanese automaker, the Hope Motor Company. That company had previously produced a series of small off-road vehicles called the ‘HopeStar ON360’. The first fully Suzuki-branded 4×4 was was introduced in 1970 and named the ’Light Jeep 10’or ‘LJ10’ for short. It was driven by a very modest 359cc air-cooled, 2-cylinder, two-stroke engine, and was originally targeted at the Australian market. More exports globally soon followed as the plucky little 4×4 was so popular.

The models kept evolving over time, with the LJ50, the Jimny8/LJ80. The engine grew to 800cc and an in-line, four cylinder, four-stroke, followed by the Jimny 1000/SJ410 and Jimny 1300/SJ413. An updated version of the SJ413 became known as the ‘Samurai’ and was the first 4×4 Suzuki officially marketed in the USA.

13151624_10154838726039148_4841848362730297778_nrthrt
The ‘Suzuki Posse’ grows ever bigger within RCCZ circles!

John Wasley one of the RCCZ crew, and the builder of this review Tamiya owns one (check out our RECON G6 report for a picture!). it’s over 20 years old, has appeared on the front cover of a 4X4 magazine after been heavily modified and is still going strong (when its not on it’s side, or breaking a half-shaft…but more from John and his wife Justine later!)

The True Jimny Emerges

Suzuki_Jimny_cabriolet_2005_-_nv_11
Original publicity shots of the generation of JImny we all know so well

In 1998 a new model and was released. It was called the Jimny in all markets globally and used the G13BB EFI engine, replaced by the M13AA EFI engine in 2001 and the M13AA VVT engine in 2005, in conjunction with an interior redesign. This generation of Jimny is one that the RCCZ crew and many of our Scale Nationals competitors know very well, and between us we now own half a dozen in various states of Lift, modification, and Off Road capabilities.

13342949_10154915961564148_7080247939144858784_njjjjj
Our daily driver…and tons of fun out on shoots and at events!

We even have our own completely stock soft top one as the mag’s daily driver, complete with RCCar.Zone and RECON G6 logos! It’s driven 1000s of miles since we got it and never missed a beat.

13432401_10154959099864148_7653692491277173134_n
It had to be done really…a little branding goes a long way!

It intrigues all that see or has a drive in it, and we are about to start our own list of modifications this winter. ‘Godzuki’ (as we call it) will get a little more capable off road by the new year!

13442160_10154959099954148_7085059443381618905_n
Anyone who knows who this is will understand the nickname of our plucky little Suzuki

You could say this vehicle has a very special place in our hearts…It may be small, but it’s a plucky and very capable Off Roader. It boasts a true ladder chassis, with 2WD for everyday road use and selectable high and low ratio 4WD for off road use, 190mm ground clearance, approach and departure angles of 34 and 46 degrees respectively, which for a car of this size (length 3.7 metres and a wheelbase of 2.2m) is amazing.

And this leads me onto the main purpose of this article…Tamiya recently released a kit of the newer model on a MF-01X chassis, and we just had to source and then let John Wasley build one to mimic theirs!

Out Of The Box & Onto The Build

1
The Tamiya version may be a little more up to date looking than our fleet, but the ‘Cute Factor’ is still there!

As with most Tamiya builds, you start with the rear 3 planetary gear diff. Remember to smear all the rotating components with the supplied grease and check that the diffs action feels smooth without any tight spots or (and yes this is a made up word):- ‘graunchyness’. Getting the tension of all three of the self tapping screws that hold the diffs cover on is the key, just nip them up and don’t force them.

4
Spot our US buddy Charlie Suangka’s favorite bag…

Next the gearbox/transmission is assembled and the internal gears fitted. The whole assembly thankfully spins on bearings, but again smear grease on all the mating surfaces to ensure the gears are well lubricated.

5
An unmistakable Tamiya 3 planetary diff

The lay shaft and spindle that the gears rotate on also requires lubrication, again a light smear, and not a huge blob of grease will suffice.

7
The inner gears of each gearbox…that off-white plastic gets everywhere!

The rear damper stays and BA9 ball studs go onto the front of the gearbox.

8
The rear sub assembly ready to fit the Torque Tuned motor

You are then prompted to add the supplied servo saver/servo horn assembly to your chosen steering servo, taking note the natural point  has the servo horn sitting perfectly 90 degrees to the servo body and with the servos spline sitting to the left as you look at it from above. A 3kg to 6kg servo is perfectly adequate for this little 4×4.

14
The servo saver helps protect the steering servo from damage…this 4kg Core RC unit is fine for this small and light a vehicle

Next comes the steering linkages, or rods as Tamiya likes to describe them. They clip onto ball studs again, and next the servo and steering linkages are affixed into a mount. Now here’s where you must ensure that you use the supplied spacers to get the servo’s height set just right. This will ensure that when bolted into the front gearbox casing that also double as part of chassis, in use the linkages have a free range of movement and don’t bind in any way, even at the most extreme of this pretty rudimentary kit suspension.

Moving Forward

The front diff is built next, and is a carbon copy of the rear. Again once complete you than add this and the front gearboxes internal gears, lube up the lot and bolt the two halves together.

9
The rear sub-assembly almost complete…a middle bridging section is added to link to the front

The front and rear sub assemblies are then joined together using a middle chassis bridge consisting of two halves. This is where things get interesting. You can build this (and the central prop/driveshaft) to accommodate 3 different wheelbase settings. 210mm (Short), 225mm (medium), or 239mm (Long). There is also a low or high ground clearance setting for the suspension.

15
A light smear of grease of advisable…especially on this central prop shafts bevel gears

The Jimny, surprisingly (as its so tiny) runs with a medium wheelbase option of 225mm, and unsurprisingly (as its Off Road) runs the high ground clearance suspension option. The rear arms go on next, with their now trademark Tamiya threaded upper arms/links.

10
Simple and basic, no oil to fill or bleed, just friction based damping

The shocks are built next and being friction units there’s no filling or bleeding required. These take a matter of minutes to construct, and then its time to add the rear god bone drive shafts, hub carriers and axles with drive cups. 10 minutes tops, was all it took to get the rear end assembled and that included fitting the body posts!

11
The shocks take seconds to build…and do their job remarkably well

The front is just as simple with the only real difference the use of C hubs and steering knuckles, and of course the linkages leading from the steering servo, out the sides of the chassis to each hub assembly with it’s dog bone drive shaft, drive cups and axle. The last thing that goes on to this part of the build are the front friction shocks, body posts and bumper. We almost have a rolling chassis by now…almost!

12
Hub carriers at the rear house the bushes that the rear axles and drive cups spin on

As the pinion is held inside the rear transmission and gearbox its impossible to visually set the correct mash or depth the pinion needs to be for the best surface contact.

17
The motor retaining plate. It not only anchors the motor in place, it also sets the perfect gear mesh with ease

Here Tamiya have come up with a simple yet genius idea. You use a supplied plastic cup form that slots over the pinion, with a slit in the side allowing you to loosen or tighten the grub screw…You simply move the pinion as far out as it will go until its resting against the inside edge of the plastic cup, noting that the cup itself is firmly pressed onto the motors bell housing and tighten up the grub screw! ‘Boom’..a perfectly set gear mesh!

16
Setting the position of the pinion on the Torque Tuned motor’s shaft is done in a very novel way…

With the motor firmly bolted onto place, the ESC and receiver are next added. The included TBLE-025 Brushless ESC is LiPo compatible (rated for 2S), and can be switched to either 2 wire brushed or 3 wire sensored brushless operation. Its a little fiddly initially, and all programmed via LED’s, but after a coffee and a little practice its soon done.

2
Brush or Sensored Brushless…the TBLE-02 ESC caters for both

To help simplify the process here’s a video showing how you can set it up:-https://youtu.be/yIZeOaCQZrk

18
Rally Block tyres and cool, replica faux alloys really look the part

With the electrics all in, the steering servo linked to the receiver and everything cantered and tested, we next build up the Faux Alloy wheels and Rally Block tyres.

A thin Cyno is best used to bond the two together and pulling back the bead and letting a slight trickle flow between them the best way.Ensure you clean up the beads of each with lighter fluid to remove mould release, and a slightly scuffing the mating surface on the wheels with sandpaper or wet n dry. A careful 30 minutes later and we had four wheels and tyres done, and no fingers stuck to the table, each other, or any of the wheels and tyres (been there, done that!).

21
Bosy posts on: Check, Wheels and tyres fitted: Check, Body…Body?

Finally, the body. Without boring you with every detail it took a day to paint, cut out and sticker up properly.

10 Points When Painting The Body:-

higlgfly
Take your time, follow out 10 golden rules and all will be good with the shell
  1. Wash the inside with hot water and mild detergent then rinse and dry. This removed the Silicon mould release spray from the inside of the shell used in the vac forming process, that could act as a resist to your chosen paint.
  2. Regularly wash your hands as the oils in your fingertips and skin can again act as a resist for the paint.
  3. Remember to add the window masks on the INSIDE before you paint, bub the edges of these with clean fingers to make sure they are sealed to the shell to avoid ‘bleeding in’ of the paint.
  4. Make sure you use a certified Lexan paint and not exterior paint designed for hard bodies. This will ensure that the first coat etches into the plastic and then that all layers after that build up a good deep colour.
  5. build up thin coats and take your time…thick coats peel off, don’t dry properly and run…
  6. Use curved scissors to cut out wheel arches, practice on waste material first as there’s an art to using them properly.
  7. Use a mild detergent and water mix in a spray bottle or vaporiser to put a fine mist on the outside. then apply decals one at a time, using a soft cloth and squeegee to remove excess moisture and air. This allows some re-positioning time and once dry the stickers will look crisp and flat with no tiny air bubbles or pockets.
  8. Take your time and don’t rush…the body is what makes or breaks any builds final overall look.
  9. Once everything’s dry and settled, again go over all stickers with a soft cloth to ensure they are 100% down and sealed to the body. They tend to relax and can lift in first 24 hours.
  10. For extra ‘Ping’ polish the outside with a spray on liquid wax, normally used for 1:1 cars…use a totally new, clean soft cloth to avoid any scratches on pristine plastic.
19
Still naked and waiting on nearly a days worth of body prep

That’s it…the little Suzuki is now done…It was time to go and give it a run and also take the 1:1 version out for some fun too!

22
Looks tiny on the bonnet of the real thing…(needs a snorkel too)

Little N Large

23
In 4×4 circles it’s all a matter of perspective!

The Jimny’s (Plural) were taken to a local 4×4 spot and put through their paces. The Tamiya, while not being as capable as the 1:1 was tons of fun. Its the ideal 1st build, or as a fun collectable. We have seen them take part in RECON G6 events once modified, and we know that our Austrian contributor Daniel Siegl has won classes and had great success with one.

24
The tyres work well on most surfaces…dry rock especially!

At under £120 for the kit its never going to be a full-on comp rig in stock form, but it is, as are all Tamiya models…lots of fun. The Torque Tuned Motor offers the right balance of wheel speed, and as it’s name implies, ‘Torque…

3
The box’s sticker says it all…A Torque Tuned motor & ESC included

In use a 5000 mAh LipPo pack lasts around 20 minutes of run time, longer I would bet if you fitted say a 35t or higher motor. The rally block tyres generate good grip on most surfaces but benefit from being scrubbed up first on concrete to break that outer surface. The motor while not ever going to win a drag race does however offer a turn of speed when required and low down low RPM finesse for more technical driving conditions.

25
The shell looks crisp and true to the bloodline…its a no brainer collectable for Suzuki 4×4 fans

A Suzuki Mad Family Footnote…

John and Justine Wasley are not only part of our RC and 1:1 4×4 global family, John is also an occasional contributor to my past and current magazines, and also a key member of the team that twice a year stages the UK Scale Nationals (and from this year onwards….the UK RECON G6).

They not only own a very cool Samurai that’s adorned the cover of an international 4×4 magazine, both compete in 4×4 events regularly and are also own the red Soft top Jimny in the background of some of our review shots, and the one the little Tamiya is actually sitting on in one…

I recently asked Justine why Suzuki 4×4’s have such a special place in their lives and hearts. Here’s the transcript:-

“Our love for Suzuki’s started with my very first car, even after passing my driving test over 26 years ago, I have still haven’t owned a ‘car’. My first ‘car’ was a 4×4 Suzuki LJ80 that we found about a year after passing my test. I loved my little Suzuki so much that after I started to compete in off road events I realised that I was damaging ‘Frank’ too much, so he was retired to my mother in laws car port (Sadly, for the next 20+ years).

I replaced Frank with ‘Jemima’, another Suzuki LJ80, and then ‘Purdy’ the Suzuki SJ410. Family and job changes meant that the Suzuki’s were replaced as daily drivers with ‘other cough’ 4×4’s, 7-seaters which were much more practical. We have always had a Suzuki in the family though as John built and modified a Suzuki samurai 413 (now with a 1.6 Sidekick engine fitted, a 416) and we have both competed in it for a number of years. After rescuing ‘Frank’ a couple of years ago from the car port and trying to persuade our oldest daughter that it would be the coolest car ever for her first vehicle (and failing miserably), we sadly listed Frank on good old EBay, and much to my regret we sold him…

But on a happier note we now had the funds to get me my own Suzuki. We found a red Suzuki Jimny with a blown engine, but has luck would have it I am married to a mechanic so we went ahead and decided to buy it. John replaced the engine and with his knowledge and experience with Suzuki off roaders he knew which modifications he wanted to do to my little truck. (I wanted to change the colour from red to purple, but that was simply one mod too far!).

The modifications that John carried out are a 3 inch suspension lift, with heavy duty castor correction suspension arms, a snorkel, so I can go in deep water, heavy duty sill bars and front and rear bumpers. The best modification though is a rock lobster transfer box that lowers the 4×4 gears by 80% making it much more controllable (and fun) off-road. The tyres are Insa-turbo special tracks and are about 3 inches taller than standard to give it the ‘Mini Monster Truck’ look.

One of the modifications that I love the most is the exhaust which is a straight through power flow back box that was originally on a Triumph Herald making my little truck very noisy. The next thing I need John to put in is a Lock right rear diff locker which he has sitting on his workbench in the garage. Oddly, he is very reluctant to put it in because I think he thinks that it will make my truck better than his, and I’ll beat him off road (which would probably happen!). I’d also like a winch on the front bumper, not that I would ever use it but it would look good!

These little Suzuki 4x4s are very underrated and looked down on by a lot of the larger green oval badge owners. We recently joined the Buxton Land Rover club at one of their trials. A number of Suzuki’s took part and we showed them that a Suzuki Jimny is a force to be reckoned with. For me personally I love the fact that the Jimny is small enough to use as an everyday vehicle (John even helped source RCCCZ’s daily driver ‘Godzuki’).

They are also an excellent off roader, surprising a lot of people with what they can do. They punch way above their weight and size, and that’s very cool…”

Positives

  • Cheap to buy & easy to build for any age group of RC fan
  • A no brainer collectible for any Suzuki Jimny fan/owner
  • Fun with a capital ‘T’ (& ‘A’ & ‘M’ & ‘I’ & ‘Y’ & ‘A’)
  • Simple to work on and repair if needed
  • Tons of future ‘Scope’ to hop up!
  • It’s TAMIYA what’s not to like?

Negatives

  • Needs oil dampers, friction ones a bit to ‘Springy’
  • ESC can be fiddly to setup initially
  • More people need to comp them!
  • Bushed not Bearings?

For more on Tamiya : CLICK HERE

For more on UK Distributor: CLICK HERE

You Spoke – They Listened – It Evolved

RCZ_Scale 1

Axial SCX10 2 Jeep Cherokee Builders Kit

Words & Images: Peter Gray

UK RRP: £335.99 Globally: $399.99

Main Website: CLICK HERE

EU Distributor: CLICK HERE

specs

  • Type: 1/10th Electric 4WD Trail Rig/Scale Crawler
  • Wheelbase: Adjustable 312mm
  • final Drive Ratio: 40.44 Stock (33.69 – 54.15 Optional Range)
  • length: 561mm
  • Width: 226mm

98% New…

Now that’s a big boast for any RC companies latest product. Especially when it’s the successor of one that’s been responsible for many RC fans entry into the Scale, Trail and Crawling scene globally. It’s replacing a design that’s been around in various guises since late 2008, and where most brands selling race chassis or out and out performance products would release an update at least every twelve or eighteen months, Axial have instead been concentrating on developing other bloodlines to add to its ever expanding range…and simply released both kit and RTR variations on its now legendary twin ladder chassis design.

8 (3)
My take on the new SCX-10 2…The sticker on the rear window says it all!

But Is That A Good Thing?

Well, in an industry that’s been plagued with, to be blunt, plagiarism, and the more affordable RTR aspect of the market getting a bigger and bigger slice of the pie of late, it’s probably a very prudent move. We live in a world where where we have seen some of the most recognisable names in RC simply disappear, with smaller companies getting taken over by other bigger ones, and even the most forward thinking and daring of brands tending to play safe and consolidate their ranges to survive. Think about the impact this one chassis has had on the scene.

10 (2)...j
The most ‘Scale’ Axial product to date by a long way…

I’ve owned, built, modified and comped with at least 5 different versions of the SCX-10 in both long and short wheelbase variants. I even won the 2012 UK Scale Nationals running a Dingo Builders Kit I famously finished building at 3am the night before the comp started. I know it inside out, It’s AX10 based transmission the mainstay of every comp rig and crawler I’ve ever built, with more hop ups and upgrades than any other rig of its genre, and a few inherent foibles to contend with. It was never perfect. We all had to do certain modifications and tweaks to make the rig ‘perform’, but it certainly made its mark, it stood its ground, but time moves on, as do the expectations of its new and more established clients.

9 (2)
Even for a die hard Axial fan like me it was a revelation to build

Change is inevitable, It’s part of the ever evolving fabric of life. And in this instance, as I sit here on an unusually dry, hot and sunny 2016 UK day, with a newly built and tested SCX-10 2 rig in front of me, it’s the most welcome thing I’ve experienced in a very, long, long time…

11 (2)jhgvhg
Build it as simple or detailed as you feel, that’s the beauty of a kit

Let me start by taking my hat off to the guys at Axial. All products however good or bad get a tough time on social media and forums. It seems that even before the inks dry on the box art someone somewhere has posted a hastily put together review, done to be the first online to dissecting it to pieces, highlighting all the bad aspects and glossing over the good. I don’t really have time for that kind of journalism.

1 (2)hhh
Note the position of the main pack…Forward weight bias optimized

Well we roll a little differently here at RCCZ. I was always taught to test products thoroughly before writing about them. And by thoroughly I mean over at least a week of running. ‘Real World Testing’ was a phrase Dez Chand always used to describe the way we tested any vehicles in RCCZ’s previous incarnation as RRCi, and it’s a process that I’ve always continued to follow on to this day.

13
It’s a pity you can see the rear body posts but I may tint the windows later on…

I’ve now put about fifteen packs through the rig, and as all my latest 2s LiPo’s are 7000mAh…that’s some serious wheel time. So far, nothing’s broken. Yes, I’ve found a few minor niggles, but nothing that would put me off either A: buying one myself. Or B: recommending anyone else does so.

No, It’s Not an Ascender Clone…

One thing I’ve seen levelled at the SCX-10 2 is that it’s simply a Vaterra Ascender clone. Now I have both rigs in my collection and can tell you categorically, they are very, very different animals. The only things that are similar are the ladder chassis, the chassis mounted steering servo and the near 45 degree steering deflection thanks to the UJ axles. Let’s face it that’s the recipe for almost any descent scale rig of late, so saying the SCX-10 and Ascender are the same is like saying a Ferrari and an Lamborghini are, yes both are Supercars, yes both can achieve insane top speeds, but they handle and drive very differently.

11 (3)
It can ascend pretty well but it’s no clone of one

Now while I rate the Ascender, especially if pitted against a stock original SCX-10, the SCX-10 2 definitely has the edge on overall performance, future tuning scope and factors like weight bias and component layout.

Let’s Start With The New AR44 Axles…

51
New spiral cut gears offer more surface contact in use

Compared to the latest axles from Vaterra and RC4WD, the original AX10 axles fitted to the SCX-10 V1 look huge, and could never be described as ‘Scale’. The new AR44 High Pinion axles are far more refined and scale externally, and have subtle changes internally too that will aid both their performance and longevity. The high pinion aspect allows for more surface contact between the pinion and crown gears. The gears themselves are cut at an angle and the ratio has been changed to 3.75 from the original axles 2.92. This reduces torque twist and means the rig feels more predictable to drive, regardless of taking left or right hand lines.

53
A much neater and ‘Scale’ looking axle, the AR44 in all its glory!

One thing that’s also not been overlooked when minimising the look of the axle is its durability. The one piece casings are re-enforced where required and Axial have also used larger bearings to help spread the load and the knuckle carriers and straight axle adaptors locate so much better than the old AX axles.

54
Would rather have had chrome or even white diff covers, but I suppose red stands out

The former has the ability to be rotated in 10 degree increments, and when combined with a stock 8 degree kingpin angle gives the steering less tyre scrub and therefore reduces load on the steering servo when at the full extent of deflection. For my build I opted to use a digital 26kg Alturn steering servo provided by Logic RC. This may seem like overkill, but I’ve found as long as you use a decent BEC to power your receiver then the steering will cope with just about anything you throw at it.

76
My choice of Alturn Steering Servo kicks out a healthy 26kg on 6v

The smaller pumpkins on the new axles really add to the look and aid with the rigs ground clearance. Inside that pumpkin resides a tough one piece locker and the new internal gears. The only thing that kinda niggled me was that red used for the diff covers. I guess chrome would be a little too much like G-Made or Vaterra Ascender…and black a little bland. I guess you could always paint them whatever colour you like…I intend to go either white or gunmetal gray as soon as possible, but for now, red they will stay.

55
UJ’s CVD’s whatever you wanna call em they offer near 45 degree steering deflection

As for steering deflection, you don’t get much better than 45 degrees! To get this with the original SCX-10, you had to fit UJ’s yourself and also swap over the button head bolts that retained the steering knuckles to the axles for flat heads.

56
THe steering knuckles are build tough…with oversized bearing to spread the load

None of that required here…just bags of steering lock and a nice tight turning circle. The last thing to mention on the axles is the bolt on link mounts. These not only add contrast being the same red as the diff covers, they also allow for some future fine tuning, as Axial or a third party hop up manufacturer could produce multi position versions to allow the geometry to be changed to suit a rigs intended use.

58
The front and rear AR44 near completion…

New Rig – New Transmission

The transmission has also been re-designed to include the look of a real bell housing, oil pan and transfer case. While most of this isn’t visible to the eye in normal use, it does have one huge advantage of lowering and centralising the driveshafts, making the whole driveline more efficient and under less strain and load. The old V1 trick of flipping the transmission around isn’t needed here as when everything’s assembled the weight bias and left/right distribution is pretty much spot on. Internally the gears are all hardened with the whole transmission running on bearings.

61
Tough 32dp metal internal gears are truly brushless and trail/comp ready

Now another slight niggle…the spur and slipper assembly fit onto a lay shaft. The whole thing as you would expect spins on bearings. But built stock and 100% by the numbers there’s some visible and tangible slop in this assembly. You can grab the spur and see it all move. Now in use, the 56t spur and 15t pinion work just fine together, and so far I’ve had no issues.

62
I had a bit of slop on my layshaft and spur assembly…but in use it didn’t cause any issues

I was tempted to shim the slop out, but felt to test the rig fully I had to run it as supplied…and I’ve run it pretty hard up and some very demanding inclines and rock formations. I guess there’s either a tolerance issue with one or more of the components, or Axial have revised that part of the build since I got this early bird review sample. I expect there will be an update or addition of a shim set in future releases…watch this space!

64
Whatever angle you view the new transmission, it looks looks 1:1 automotive in origin

Slop aside, the transmission also allows for a wide range of ratios to be employed and its stock ratio sits at 40.44, but there’s scope for between 33.69 – 54.15. If I remember correctly the original SCX-10 ran at something like 35, so Axial have changed the stock ratio to offer a good balance between torque and wheel speed, especially if like me you opt for a motor in the 30-35t range.

65
THe motor mount & slipper cover does a great job of keeping out dirt & debris in use

To further aid this Axial will also be releasing a optional 2-speed transmission add on that allows the selection of high or low range via a shift servo. Now this is great, and is a ploy that many RC brands use to get add on sales at a later date with a must have hop up, but why not include it in the Builders Kit in the first place? To me, if Axial want to issue a statement of intent that they have the best out of the box, Lexan bodied rig on the planet they should offer it as a ‘complete kit’ with the 2-speed included. It’s a bit like buying the newest console title and not getting the last level, big boss fight to finish it after a week of playing…I get why they do it, I just feel it would have elevated this already very well designed and specified kit to an even loftier height (rant over!)

67
The new sideways and forward mounted battery tray

The RR10 Bomber 2-Speed is still pretty rare here in the UK, and looking at this transmission im convinced its the same part.  Many owners wanting the option have had to source one from the US. I really hope the official SCX-10 2-speed part lands soon and in numbers to meet the demand.

CMS FTW

Having the steering servo chassis mounted with a 3-link Panhard Link/Track Bar offers a much cleaner look to the front end, far more ‘scale’. To out and out performance junkies, this setup isn’t as efficient as a 4-link and axle mounted servo with drag link and can reduce axle articulation and induce some bump steer. But that said, Axial have obviously done lots of testing on this aspect and also studied many 1:1 vehicles that use a similar setup.

SONY DSC
Chassis mounting the servo and using a Panhard Link is far more ‘Scale’

In use it works really well, and I would rather trade a small percentage of articulation for the look it gives the rig. Having driven the rig for many hours, over very different types of terrain I have simply become accustomed to it, any foibles it may introduce are driven through and accepted as part of the challenge of running a new rig. With some time spent to tune the pre-load on the shocks, performance can be made pretty even on the articulation when compressing and rebounding both left and right.

20
Whatever the terrain the SCX-10 2 took it in its stride

As for the included alloy bodied ‘ICON Vehicle Dynamics’ replica faux piggyback units, they are the same shocks that Axial have employed in past builders kit SCX10 releases, and if built, bled and sealed correctly not only look good, they perform well too.

yuyfuyugyd
The sum of its parts…An ICON in the making (literally!)

I always use Team Associated ‘Green Slime’ on all ‘O’ rings and seals, and it makes a huge difference to the longevity of the shocks between re-fills and builds. Under duress they do leak slightly, but then again so do 99.9% of units on the market today.

60
The threaded, alloy ICON shocks are a builders kit staple…they just work.

Used in conjunction with the multiple position shock hoops on the chassis, their action can be quickly tuned from stiff ‘Street’ to softer ‘Trail’ in seconds. Add in the threaded bodies and pre-load collars and you have very versatile units.

68
Shock hoops offer multiple mounting positions

The benchmark to this day of crawler shocks is still the Losi Comp Crawler units. They have become the holy grail of shocks in this genre, but don’t look ‘Scale’. At full lock the inherent issue of tyres rubbing on the shocks springs and their retaining cups is still present, and if left un-checked can lead to loss of the latter in use. There’s 2 things I do to stop this. Firstly I make sure I set my steering end points to allow a good lock both left and right, but stop the wheels and tyres from physically rubbing, and secondly for years now I’ve been applying a tiny smear of Cyno to literally stick the bottom edge of the spring onto the cup. I know it’s a little OTT, but it works, and saves time searching for missing retaining cups out in the wild…been there, done that!

Servo Winch or Bumper Winch…You Decide!

I simply couldn’t live without a winch on my rigs. And in past generations of Axial products have had to either immediately ditch the stock bumper in favour for a purpose made metal RC4WD unit, ready to accommodate my chosen winch. Or, as I’ve done on 2 past builds, make an elaborate Alloy or Delrin brace, to ensure the stock bumper, made from a hard wearing but ultimately flexible plastic could take the strain. I’ve never understood why Axial didn’t just make a far more substantial unit in the first place, one that’s ready to accept the vast majority of winches on the market…

DSC05668hgdy
Chassis mounted Servo Winch or Traditional bumper mounted one?…You decide!

Well they have, the new bumpers are JCR Vanguard replica units and they do! They still have a small acceptable percentage of ‘flex’, but will happily take the strain of a powerful winch and a fully laden rig…even up the side of a door (my favourite old Skool test of both winch and cable!).

I did however have to Dremel away a tiny section of the bumpers top surface to fit my chosen RC4WD Warn replica winch and accommodate the pod housing and its high torque motor and gearing. I removed the winches alloy bottom plate and fairlead and used the former as a template to drill the mounting holes into the bumper, then bolted it directly from underneath onto the surface for a nice clean look. That said though, it is a big wide unit and placing a 3-Racing and other RC4WD units on the bumper, they will actually fit without any modding at all.

2
Bumper mounter RC4WD Warn Winch, fairlead and 100lb breaking strain trace wire as cable

But that’s not all folks…If you want to go down the winch servo route Axial also have you covered. There’s a space behind the steering servo to place the winch servo. There’s a clear route for the cable, tough plastic guides that can be bolted on the the chassis to aid the cables progress and keep it away from vital steering components, and the bumper itself has a built in plastic fairlead and cable opening. The latter can be strengthened as I did with an inexpensive alloy fairlead, bolted directly on top of it. For the few £ it cost, it not only looks great, it will stop my fishing trace winch cable cutting into and abrasions the bumper itself in use. I’m not a winch servo fan myself, but I get those that prefer them, keeping the front looking neat and allowing for more lights to be fitted. I prefer to see the winch sitting on the bumper looking mean!

I Want A Jeep Cherokee Now…

When I first saw the SCX-10 2s leaked images I had initially mixed opinions. I thought “Cherokee…mmm, school runs, soccer moms, trips to the supermarket to get groceries…” But then I saw what it was based on, and researched some of the builds people have done to them in the 1:1 world, and I got it. The body may be 16 years old and very retro (after all it’s a 2000 model), it’s less rounded than what came after, but its quirky, a real brute of a 4×4 and a blank canvas for anyone into building rigs to paint any picture they desire with it.

ax90046_dimensions_950

Since the launch of the SCX-10 2, I’ve not seen two builds that look the same. Everyone has personalised them to the hilt, and my build would be no exception. Even built completely to manual, just a subtle change of colour makes this rig look totally different. I had a plan…and we had a new body painter on the team. This would be his first RCCZ project and I was really looking forward to seeing the end result.

ax90046_scx10_2_image_01
Axials ‘Box Art’ rig…mine would be very, very different

But this isn’t just a Lexan shell with a few stickers trying to fool the eye into believing it’s real. No, this body not only looks proportionally correct, it also comes with a slew of bolt on details like a cool roof rack, door handles, wing mirrors, a combined grill/headlight unit and rear door trim. It’s these little touches that when combined with a crisp pain job and Axia’s quality decal sheets that elevate it to near hard body status in terms of its scale realism. But more on those details a little later, first I needed to design a colour scheme and brief the painter. I have a history with my builds on using colour schemes and liveries more akin to a race vehicle. From my Yeti XL build, through to my Wraith Spawn, I like to be very different. This would be no exception and the colour of the wheels I used would be the key. Although I like the look of the supplied black plastic replica Method Mesh wheels, they weren’t beadlocks, so would need gluing after first weighting and possibly venting them correctly…

method_wheel_470
I’m afraid glued wheels just didn’t cut the mustard for me…

This I’m afraid is another minor niggle. I’ve not met anyone yet who gets hooked to this aspect of the hobby that doesn’t experiment with wheels/tyres/weight and insert combinations. It’s not a dark art, but it is one that if learnt, can transform a rigs abilities from impressive…to awesome. Beadlock wheels make this whole process easier and I’m quite surprised that Axial have chosen to go down the glued on wheel route yet again. Even simple, plastic, 2 piece bead locks would elevate this kit in the eyes of the scale building world and show that they understood our pain and weight bias based obsession! I’m guessing it’s a due to a production cost implication but I would far rather they didn’t licence a wheel design that many will simply not use and swap out (like I did), and instead put the same money into a neat, generic looking scale plastic two (or three part) plastic bead lock.

IMG_2873
Boom Racing Krait Beadlocks did the job…they look so much more ‘Scale’ and can be tuned with weights

I instead chose to order from Asiatees a set of very detailed, alloy, Boom Racing manufactured ‘Sandstorm Krait’ beadlocks. At £62 for a set of 4, they do look epic and are pretty good value for money. The centre hub is threaded and screws on to hide the end of each axle and its M4 Nyloc nut perfectly. They are a bit of a fiddle to assemble, especially when adding 1.5 strips of stick on weight around each front, but well worth it for optimum weight bias. I also deviated at this point from the stock BF Goodrich kit tyres.

bfgoodrich_ko2_tire_470
The BF Goodrich tyres will be used for another project…I took a different path

I’ve saved them for future use as I’ve heard great things about them, especially on dry rocks. But where I run is mostly in the local woods, it’s moss covered rocks, moist leaf mulch, stone covered stream beds and deep water and good old fashioned UK mud (all year round).

75
RC4WD Mickey Thompson Baja Claws offered a deep tread, and a soft compound

To this end I fitted a set of RC4WD ‘Mickey Thompson Baja Claws‘. Tyres I’ve found perfect for this environment. As for the colour…well I describe it as Gun Metal crossed with Pewter. I took a picture, sent it to the painter and said “This, Black & Silver…” As for the design, I simply wrote “Go as crazy as you want dude…” And he did, in a very cool way!

That Essential Original 2%

66
The chassis rails and Shock are the only carry over items from SCX-10 MK1

The C section Steel ladder chassis may be the only carry over item from its predecessor but it’s the essential backbone that all the other components literally bolt onto. Cross members offer mounting points for the front and rear bumpers, the new longitudinal battery mount, waterproof radio box and wide plastic protective mount for the RC4WD ESC and any other components like a BEC, LED lighting controller (or as I have, another MTroniks ESC for the winch itself). There’s neat routing points for the steering Servo, optional LED lighting for the bumpers built in light buckets and winch wiring.

1
I fitted a separate Mtroniks ESC for the winch…Proportional in and out at my fingertips
11
7000 mAh 2S Optipower main Pack, and all electrics in…a rolling chassis I finally had!

As for the new battery pack mount it’s just what the doctor ordered. No more modifying or adding third party battery mounts to forward mount the main pack. My chosen 7000 mAh 2S Optipower LiPo fitted perfectly, with still room to spare if you decided to go 3s in the future. There are bolt on stand offs that can be set to accommodate different sized packs and using a single Velcro retaining strap adds a little more security to the whole process.

As for the packs orientation, having the pack seated on its side is actually a pretty genius approach. It offers far more room either side and even running with wheels with no weights offers a forward weight bias that allows the rig to climb up and over most terrain with ease. Running weighted front wheels it’s even better, and in tests our review rig managed inclines in excess of 50 degrees…

0 (2)
I built this rig to run, and oh have I run it!

I think the record for a fully loaded MOA comp crawler rig still stands at a staggering 63 degrees, we even ran a competition one year at the Nationals to set that particular benchmark. (I may have to dig out that test apparatus and run it again in October with just scale builds!).

Another minor niggle here is that the plastic moulding for the mount actually covers the female ports on most packs I tested in the rig.

DSC05623plus
THe main packs cradle/holder…not ‘Brick Pack’ friendly unless you make holes to accommodate

So it’s either been designed for packs with leads built in and protruding from the top, or Axial expect you to do as I did, and use a body reamer, drill or Dremel to make two holes in the correct place to plug in the male connectors of the ESC’s connecting lead.

10
Note how my male 4mm Corally plugs go into the pack at the side. The lower female port was obscured

It’s not a huge omission, but one I would have designed slightly differently myself to accommodate the now almost standard issue ‘Brick Pack’ LiPo’s with female ports on them. That aside, compared to the last gen SCX-10 it’s a night and day improvement.

Racking Up Those Scale Points

The beauty of a kit like this is that every single one will end up slightly different and become an extension of the individual that builds it. I had collated a pile of scale accessories by RC4WD, CarismaRC, Fastraxx and Boom Racing. As soon as the body arrived back from the painter..(and I must stop at this point and just say “Wow”…this dude can paint!) I got on with finishing this aspect of the build. Now in days gone by a one or two colour paint job, a few decals and possibly just a smattering of scale accessories would have sufficed. But in 2016 the industry and scale scene has upped its game, ‘Scale Realism’ are the keywords, and making a rig that at first glance fools the eye and brain into thinking “is that real” is the ultimate goal for manufacturers.

6 (3)
I ran my MK 1 here back in the day…

Until now many Axial builds were good, but never had the depth of detail to make you double take. The SCX-10 2 resolves that in one go…and then adds a cherry on the top! From the roof rack, through to the grille and headlamp detail, wing mirrors and door handles, this additional layer of depth from simple mouldings is what we’ve all been waiting for. There are a few tricky bits, like cutting out and Dremeling the opening for the plastic grille moulding. I don’t get why Axial would design that part of the shell to have a very thin line of plastic (about 2.5mm) running under the grille? I simply got rid of that bottom edge and just cut and smoothed 3 sides instead of 4. It retains the look of the front end without all the hardship of cutting that thin strip perfectly.

19
Mean looking isn’t it! That grille looks cool but how you have to fit it isn’t logical

The roof rack was also a little tricky as you have to used a beveled mount placed inside the shell and screw the top half into it to compensate for the angle of the roofs sides. This isn’t as simple as it sounds as screwing into the angled internal mount is fiddly to say the least. Again all for making life easier I simply made the mounting holes slightly bigger, used M2.5 nuts and bolts with rubber grommets placed on the inside to space the Nyloc nuts away from the body inside and avoid damaging the amazing paint job internally. It’s not me being rebellious, it’s me making the build process as easy as possible!

18
The roof rack fully loaded…Yes it adds additional weight high up, but think of the scale points!

I next added the wing mirrors, the moulding that sits on the trucks tailgate and after painting the smaller lenses that affix inside the grill and headlamp moulding with a Tamiya Acrylic designed for LED lenses, I sat back and took a look. In this ‘stock’ built form it’s an impressive looking rig, but I wasn’t finished, not by a long shot! I added four fog lamps. Two to the front bumper, either side of my RC4WD Warn winch, and one more on the top of each windscreen pillar either side of the front of the roof rack.

17
The shell looks epic…out new painter rocks!

I next added an RC4WD LED light bar to fit into the gap between the roof spots and complete that area. I put a tiny rubber grommet into a hole under the bar and fed the wiring through to hide it from view. Internally I hot glue gunned the wires neatly into the shell and then covered them in black electrical tape to hide them from view.

I had amasses a range of scale accessories but didn’t want them bouncing around loose on the roof rack or strapped down with individual bungee cords. I came up with an idea. I used a thin sheet of black expanded rubber packing measured to the internal dimensions of the roof rack, and then used Cyno to glue the accessories into place. They looked like they had been packed properly, wouldn’t move about or damage each other, and when covered with a cargo net made from the inside of an old camera bag, edged with black electrical tape looked perfect!

4 (2)
Huge shout out to AceofAxe for the 3D printed sand ladders!

I didn’t use the plastic tow hook/hitch that came with the kit. Instead I fitted a metal RC4WD rear carrier, that fits perfectly into the bumper. in normal trail use it doesn’t impede the rear clearance angle, but in comp use of over more challenging terrain it can be in-hooked and fixed flat against the rear door/tailgate. In the 1:1 works these carriers I’m informed are used for anything from carrying luggage, snowboards or mountain bikes to deer carcasses! I opted to use it for storing two sand ladders AceoAxe had 3D printed for me, and then use two RCBitz scale bungee cords to affix them in place! My last piece of detailing was to add a RC4WD snorkel. It’s actually an item not designed for the Cherokee, it’s designed for a D90 or D110, but a little re-shaping with a craft knife and some fine grit wet and dry, and it looked like it was!

5 (3)
As a certain Mr Schultz always says…this rig’s got TUCK’

After another hour of applying subtle decals to the body, and with a fine water and detergent spray and squeegee the windows in place, I was nearly ready to fit the body to the chassis. I named this part of the build ‘Operation Stealth Mount…’ I had a set of magnetic mounts I had planned to fit to one of Yokomo my drift cars. I decided that I would use them at the front to keep the bonnet/hood area as clean looking as possible, and simple us the normal rear roof mounts as stock, but hide under the cargo netting and accessories. This plan worked a treat as the rear mounts were totally unseen, and added an extra level of security in case the body got cause up and came loose at the front in use. Another hour later and the rig was finished….well I say finished, but I just couldn’t resist adding more LEDs into the light buckets in the headlamps and side lights, again hot glue was used to mount them, then the glue painted Matt black to hide it internally and help it blend in.

3
Magnetic ‘Stealth Mounts’ …clean lines and happy trails

A last touch was to keep the front window surround in, and use a scalpel to cut out the window decal. It’s an old drifting build trick and makes the front window look far more crisp than a decal itself ever would. In a future part of the build I will attempt an interior. But as the rig doesn’t come with one from the box, I thought for now that was enough. I was itching to get the rig up and running…

I photographed the rig from all angles and was very pleased with the end result. I packed the rig into the boot of my jeep and the following morning set out to Burton Dasset. It’s the place I first ran an Axial, the place I first met Speedy Steve, and since 2007 has been a regular haunt for crawling and scale fun. It’s also somewhere I know every part of intimately, it’s lines and inclines may be getting more worn with time, but It’s by far the perfect place to test this new Axial rigs abilities and have some 1:1 fun too as it also has a 4×4 trail!

Re Discovering Scale Adventure

The sun was out, the sky slightly cloudy but bright blue, my 1 hour drive, roof off, at 6.30am, coffee in hand made me feel glad to be alive. I arrived, grabbed a ticket to use the park all day and hit the first location, a section of rocks surrounding a muddy and wet gravel area with a series of steep inclines on the other. Now surrounding this location are a series of 1:1 trails leading first down a steep incline, across my location and then up another incline the other side to disappear over the hill the other side. At 7.30am it was deserted and I must admit I did spend a while driving up and down both sides in 4WD low range before parking on the top of the hill! Who needs car parks!

3 (2)
At Burton Dassett…over 4 hours of intense testing!

 

I got the rig out and did the usual glamour shots, recreating some of the poses my very first SCX-10 build was put in all those years ago. I then plugged in the 7000mAh pack, made sure the winch was working properly and hit the trails. The first test was a very steep incline over some tree roots and then onto and even steeper mud track leading to the upper level of the area I was in. It breezed it, like effortlessly, my 2s LiPo, RC4WD brushed ESC and Igified 35t brushed motor offering just the right combination of torque (and when needed) bursts of wheel speed.

Great Memories…Re-lived

I spent the next 4 hours just driving the rig up lines I knew well from my Comp Crawling ands early MK1 SCX-10 days, some it destroyed, others because of its size, it struggled and got its rock sliders hung up on, but that was more about me trying to squeeze it through narrow gaps it wasn’t designed for, than the rigs out and out ability.

1 (3)
I tried every line I knew at the venue…and a few I didn’t!

I drove it through ankle deep water in the woodland area with its stream at the lower part of the park, and it survived that, and then up and down the steep inclined that are scattered across this multi acre site.

Side hilling at even steep angles it coped with perfectly, you just had to remember where its tipping point was and the sheer amount of accessories I had put in that roof rack. Yes it ended up on its side on a few occasions, but that’s how you get to understand a rigs capabilities, by truly pushing and testing its limits. The time just flew I was that engrossed. I’ve not been into driving a rig so much since my original ARX10 way back when.

Conclusions

Its a great all round rig and other than tuning the pre-load to stop it trying to torque twist (yes it does it a little bit, (all shaft driven rigs will, regardless of the manufacturers claims to the contrary) it ran flawlessly.

19 (2)
The new King of the Lexan bodied Scale Scene? I think so…

The transmission while using a coarser 32dp gear than previous rigs wasn’t noticeably more noisy in use, and the driveline took everything I threw at it. My earlier concerns about the slop in the lay shaft and Spur assembly seemed trivial as I had no issues. It simply found its natural mesh point and stayed there. I will shim it at some point or as others have done add an additional bearing, but for now, its being run stock.

Would I buy one? Hell yes. Its the natural progression of everything that I love about this hobby. This is my go to everyday rig, for both fun and competition. My other is a leaf spring hard bodies build that’s chalk and cheese different. Neither can be compared or contrasted. I run each for very different reasons, and treat each with the respect they deserve. The SCX-10 2 it must be said is the more capable rig in most situations, but then again it would be…its been designed and built to perform way beyond a scale version of its 1:1 self, and that’s a point to remember.

35
Chalk ‘n’ Cheese…HardBodied Build v Lexan Build…I love both, but for very different reasons

I’ve just recently fitted FPV to it and I’ll follow up with a smaller article on that very soon.  I have a future plan for this rig, and its so cunning you could (insert Black Adder Joke of your own preference!). But more of that in the future. Until then. Batch one that hit the US and Europe sold out very, very quickly. There’s lots of interest in the new SCX-10 2 and quite rightly so. Pre-orders are being taken on batch 2 that lands at the end of September from what I’ve been told.

4 (3)
It took everything I threw at it and just kept on going…Great rig to build & drive!

If you are teetering on the edge, go on take the plunge. For die hard Axial fans like me its a total no-brainer. And for those wanting a fun build, and a well manufactured and designed kit, you cant really go wrong…unless you hate building, painting and detailing. but there is a solution, Axial recently released a RTR version in a rather fetching Gray. Its a blank canvas for a future project, but without all the initial build time.

Either way, and minor niggles aside, the SCX-10 2 is a worthy successor for the global scale communities Lexan Crown…Long live the King!

Here’s Axials ‘Official’ video of the SCX-10 2 in action:-

Positives

  • A 98% ‘New’ design (just original chassis rail design remains)
  • Front mounted main pack & optimised weight bias
  • Build it to your own Specification & chosen use
  • Bumper Mounted or Servo Winch Options
  • Clear future 2-speed upgrade path
  • Near 45 degree steering deflection
  • Included ICON Alloy shocks ‘Work’!
  • Additional Scale Details look epic

Negatives

  • Roof rack fiddly to fit from inside & out, can damage paint in process
  • Glued Tyres…Non-beadlock wheels…(Axial why?)
  • Transmission slop in Layshaft/Spur assembly
  • 2-Speed NOT included in box…(again, why not?)

For more on Axial Racing & all its products: CLICK HERE

For more on RC4WD & its range of suitable SCX Hop Ups: CLICK HERE

Coming In Fighting

RCZ_Bash 100

My-First-Kit-Build

Tamiya DT-03 Racing Fighter

UK RRP: £99.99 UK Distributor: Click HERE

  • Type 2WD Electric Buggy
  • Length: 400mm
  • Width: 244mm
  • Height: 134mm
  • Wheelbase: 287mm
  • Gear Ratio = 9.28:1

Words & Images: Ian Haden

Last time out, as a total newb to the RC hobby I was graced with a ready to run offering that required very little setup before I could get out in to the wide open spaces and play. I loved it and was well and truly hooked as I whole heartedly knew I would be. Knowing this, and also knowing I’m always looking for new things to try and new toys to play with, Pete felt I was ready for the next step toward RC enlightenment.

Self-Build

On a rare sunny afternoon, I met up with Phil Makeitbuildit Lawrence at his man cave / workplace / RC haven and with a smile on his face he handed me a big box. “Your next assignment” he said. I looked on the box and on it was a cool looking orange buggy. It was the new Tamiya Racing Fighter. “Cool”, I thought, I had seen an advert for this in the last edition of the RCCar.zone magazine and remembered thinking how great it looked. I was looking forward to giving this a test drive! At this point, I didn’t realise it was in bits, and opened the box to look at it, expecting to see a fully assembled buggy with a painted body shell just waiting for me to drool over. However, as I opened the box I saw a clear body shell still in the moulding, gears, more screws than B&Q, lots of plastic parts on sprues and more besides.

IMG_2990
Parts, lots of parts…I gotta build this before I can run it…intriguing!

It was then that the full reality of the task dawned on me and if I’m honest, as well as being excited at the prospect of being able to have a go at this, I was also a little apprehensive. This was a far cry from the Lego kits I’m used to doing with my kids.

Tamiya I know is a huge name in the RC world. They have been around since I was young and always seem to be releasing new great looking kits. The opportunity to build one of these was a great one, and I knew I’d be in good hands with such a trusted manufacturer. After all, if they have been around this long they must be doing something right. The kit came with an ESC and an upgraded torque tuned motor. I did however have to add the steering servo, transmitter and receiver myself. Also, there was no battery included in the box, so this also had to go on my newly formed shopping list. I contemplated turning to ebay for the parts, thinking I could grab a bargain or two, but I wanted to make sure I not only got the right parts, but good parts too. I didn’t want to spoil the review with sub-par parts that weren’t up to the job. Luckily I had a handy alternative. I have the aforementioned friend who has a healthy interest in all things RC, and an RC hobby store just up the road from where I live. Yay.

I arranged to meet with Mr MakeitBuildit and we made our way to the store. After a brief chat with the owner I purchased a mid-range servo, controller and receiver. While these did not break the bank, they were of sufficient quality to ensure I was not going to do the Racing Fighter an injustice.

tamiya-logo
Probably the most iconic logo in RC Car history

Before we left, I remembered the clear plastic body shell. Paint!! I need paint too. I toyed with the idea of copying the box, the orange body with the black tail section. It’s a very striking colour scheme and looks great. However, I imagine a lot of the appeal of building these comes from the freedom to choose whatever colours you want from the Tamiya paint range. So, after a few minutes’ deliberation I decided to exercise this freedom and go with my own colours and design. After throwing some ideas around (sometimes you can have too much choice) I decided to go with a slightly retro look. I settled on a light blue shell with a white “Cobra” stripe down the middle. How I was going to make this a reality at this point I was unsure, but nonetheless I bought some Tamiya blue and white spray paint along with the rest of my goodies. With my new parts and paints literally “in the bag” I was all set to start the build.

Onto The Assembly

When I opened the box to start the build I had forgotten just how many parts there were. Bags of parts, many, many sprues, stickers and a smattering of electrical parts and wires. This was not going to be a quick job. I couldn’t help but think “Where do I start?” as I laid out the parts in front of me.

IMG_3026
A classic Tamiya diff, before being greased I dry assembled it

One thing I learnt from the small setup I did on the ready to run truck was to make sure I read the instructions before doing anything. As you would expect from an established kit manufacturing giant like Tamiya, the instructions were very detailed. Each bag of parts was labelled A to D. The instructions clearly show which bag of parts you need for each part of the build. This helps no end. The parts on the sprues, I was very pleased to see, were also clearly marked. Identifying the correct parts is much simpler when they have a letter and number to identify them by.

IMG_3019
You could describe this chassis as a monocoque…very cool

For seasoned builders, none of this will be a big surprise but as a newcomer, I cannot tell you how helpful it was. A simple touch that makes all the difference, and this one actually allowed me to get started with minimal fuss. The diagrams were so detailed that I actually looked to match up the parts in the pictures, with those in the pack, and then double checked I had the correct numbered piece. Unfortunately, because of other commitments, there was no way I was going to get this done in one sitting, however, so once I completed the Bag A section I put the body build to one side. It was already starting to look a little bit like a car and I was pleased I’d made a decent start with nothing snapping or bursting into flames.

IMG_3032fff
The rear sub assembly fitted with the Torque Tuned Motor

Later that week, Phil called. He had another Tamiya car to build and wondered if I wanted to go round and finish my build at same time. Sounded like a good idea to me. When I got there I decided to start on the body shell first. I knew this was going to need to dry after painting so thought it was best to get it out of the way early. However, I had not appreciated just how much work goes into getting the body shells prepared and painted. The shell needed to be cut out, and once again I felt a bit nervous. This is the bit that everyone sees, the bit that people comment on firsthand to add to the pressure, it was going to be photographed to go into an online magazine! One wrong cut and it’s all over. So, slowly, with a very small pair of scissors I took to the plastic. There were a few awkward corners, but thankfully nothing I could not cope with in the end. After a few minutes I had two sections cut out, and with a sigh of relief I started to prep them for painting.

IMG_3033 fg
THe rolling chassis came together quickly…It’s the body that took some time

After washing out the undersides, and then covering up the windows on the inside of the shell with the stickers that are provided I moved onto covering up the Viper stripe I was looking to create. I decided to run a thin covering of masking tape down the middle of the main body shell, but went with a thicker line on the tail. This would hopefully create a nice effect once finished and add a bit more interest to it. Once happy they were straight and in position I took out my tin of blue spray paint. Phil had already advised me that long smooth passes with the spray was the order of the day, so with that in mind I went to it. The blue took three coats to get a complete covering, but thankfully they did not take too long to dry in between. Once I was happy this layer was complete, I moved onto the white stripe. I took off the tape that I had used and was gutted to find that some blue paint had still crept underneath and leaked onto what should have been the white section.

Lucky however, as the paint was now dry I was able to scrape most of this off with a scalpel, taking care not to scratch the shell itself. This tidied the lines up some way. It was not perfect, but it was good enough. With that, out came the white paint. Again, three coats were needed to make sure the white had covered the whole shell evenly. Once this was dry I was able to remove the stickers in the windows and look upon the completed shell. I was really pleased with how my first paining attempt had finished. The blue was just the right shade I was after, and it had the stripe I wanted down the middle. In the end I was pleased that I had not simply opted for a single colour. I wanted to challenge myself to an extent, without giving myself an impossible task. As such, I had a shell that I thought pretty good. Yay me!! Phil then handed me another tin of spray paint. “Smoke for the Windows” he said. “Brilliant” I replied. A quick spray later and I had some smoky, half blacked out windows too.

IMG_1527ggt
Painted, fitted and pre-stickers being applied (or ‘decals’ as pete calls em!)

Leaving the shell to settle I went back to the main body build. One of the most satisfying things I found from doing the build was finding out how things worked. Putting the “diffs” together and sealing them in their casing is something I have never done before. It was fascinating to see the simplicity of them, while understanding what a crucial role they play, not only in RC cars, but in their big brothers that we drive every day. There were many other areas of the build I enjoyed too. Setting up the gears that worked with the motor, and then onto the drive shaft. Putting together the quality oil filled front and rear shock absorbers. All the time, gaining an understanding into what makes this car tick. Although at the time I don’t think I fully appreciated it, I was gaining an in-depth knowledge into how the Racing Fighter works, which bit does what, where it is meant to go and what it is meant to do. Of course, this knowledge will in time transfer itself to other builds and models too, which can only be a good thing.

IMG_1528kk
Stickered up and raring to go…looks ace finished!

There was however one part of the build I did not enjoy as much as the rest. Getting the tyres onto the wheels. This is especially true for the rear tyres. I understand why they are tight. I don’t want a tyre ripping itself away from the wheel because it was too loose, but wow are they a pain to get on. It was a struggle of epic proportions, with grunting many of the Wimbledon tennis players would have been proud of before I finally had them all on.

With the wheels finally completed, and attached, the main build was complete. I had of course followed the instructions to place all of the electronics in the correct place and connect them up to each other. So with that the car was in essence ready to run. However, the build had taken me around 4 hours to complete and it was midnight at Phil’s. I thought it best to leave him to his cocoa and being honest I was pretty tired myself. The test run would have to be another day.

Before I could take the Racing Fighter out there was one more job I had to do to finish things off. The livery stickers that come included in the set. These would finish the shell off to give it the polished look. For this job I enlisted the help of my partner Wendy. She cut out the stickers and I stuck them on. The partnership worked wonders and we were done in a little over 20 minutes. And looking down at my completed shell I was chuffed with how it looked. It’s amazing how much some quality stickers can lift a paint job. While I was pleased with the body shell before, once finished I was not only pleased, but also proud. Proud of the whole thing. The sense of accomplishment at building this was something I was not expecting. I couldn’t stop looking it, thinking “Wow…I did that”. I’m sure even the most veteran of builders out there can remember their first build and how they felt when it was done. It’s a great feeling.

The Driving Experience

IMG_3167 - Copy
For my first ever buggy build the way it drove was amazing…I can see more on the horizon!

The first time out with my new car was just into the back garden with my son. I didn’t really know what to expect. I half expected it to explode in comedy Simpsons style, hurtling into the flower beds. Anyone who knows me would probably expect the same. But no. With my 2S battery inside, it raced around the garden and, looked great as it did so. It jumped off the decking and onto the grass with ease, taking the landing in its stride before racing off once more. I upped the ante a little and pulled out the skateboard ramp. Again, the Racing Fighter handled it, and both me and my boy loved seeing it fly though the air. It felt really well balanced. Every jump and turn was easily controlled by the oil filled dampeners and we were loving racing it around the garden. Then after 15mins something happened. The car stopped. The motor was revving, but the wheels were not turning. Now, if this had happened with the ready to run truck I used, I would have panicked. I had no idea how that was put together and would not have known where to start in finding any internal faults that were not obvious.

IMG_3179
Even totally stock and on 7.2v it still manages a rooster tail of gravel

However, that was not the case with the Racing Fighter. I had screwed every screw and greased every gear. I knew how this car worked. Looking at it, I could see everything was connected to where they should be and the drive shafts where exactly where they were meant to be too. Which left one option. The gears in the motor housing. I figured something must have come loose in there, and therefore no power is getting to the drive shaft. With the confidence that only comes from knowing exactly what to expect, I removed the cover to expose the gears inside. Sure enough, the gear that attaches directly to the motor was not aligned to the other gears. As it turned out, I had not sufficiently tightened up the grub screw that fixes it in place. A simple fix. After correcting my mistake, and putting the cover back on a quick test showed that this was indeed the problem. The motor was turning the wheels once more! This fix was only possible due to the fact I did the build. Already I was seeing the benefits this approach can bring.

IMG_3181
Slight air for a start to see how it jumps…

I have since taken the Racing Fighter out a couple of times. The car is a lot of fun. It is fast, nimble and very responsive. As it is rear drive, skids and donuts are very easy to achieve and very satisfying. It handled every terrain I could find to throw it at with ease, from grass fields, to stony car parks and pretty much everything in-between. It looks great too. The sleek body shell offset by the big rear wheels and thinner front ones gives it a great classic buggy look. It sits close to the floor and seems to hug the ground as it races off. I quickly felt very comfortable with it, and was confidently throwing it into corners, skids and jumps. Of course, not everything you try goes to plan and I was pleasantly surprised by how resilient it is. It has already taken its fair share of tumbles, flips and bumps, but the Racing Fighter has taken these on the chin with little fuss. There is hardly a scratch on the shell or the plastic bumpers keeping it looking its best. I have even had some people comment on the paint work, bringing with it that pang of pride again. Something you don’t get with a body shell pre-painted.

IMG_3186
Then some real airtime, over and over again!

Conclusion

When I was first given the Tamiya box and told to build my next car, I didn’t really get why people would do this. Looking at all the parts in the box my first thought was “isn’t it easier to buy one ready-made?” And of course, yes, it is. But that, I now know, is not the full story. Building your car from scratch, piece by piece, is very fulfilling. I learnt so much about how RC cars work during the build that I now feel much more confident when taking off the lids. If something were to go wrong in the future I have no doubt I would not only know what the issue is, but also how to fix it. Something that cannot be said for a pre-built machine. I literally know this car inside and out.

Something I have already mentioned is the freedom to paint your shell as you want it. It’s is great to have the choice and even better to see your design, your paint job racing around for others to see.

IMG_3194
The start of my journey into racing and more sophisticated kit builds. Tamiya, I thank you!

The Racing Fighter itself is great! As I’ve already mentioned it’s fast, easy to get the hang of and very well behaved. Because of how stable it is, it is easy to get it up to full speed (at least in a 2S battery) and still feel in total control. It is very nimble and is aided by a very small turning circle. For the price, I don’t think you can go wrong. The Tamiya write up says this kit is aimed at less experienced builders, offering hassle free assembly and the opportunity to get to grips with RC car composition and construction. Tamiya have hit the mark on all of these points and they deliver a tough car that is a lot of fun and is sure to be a favourite of anybody who builds it. It’s certainly a firm favourite of mine!

Positives

  • Easy to build and understand
  • Great ‘Training’ for future builds
  • 2WD is a true drivers car
  • Off Road Basher or stock club racer

Negatives

  • Painting and cutting out shell difficult for a newb
  • Stickers can be fiddly for a newb
  • Needs ballraces included as standard

For more on Tamiya globally : CLICK HERE